We research everything we recommend. When you buy through our links, we may earn a commission. Learn more

Buying guide · 10 min read · Updated October 2, 2026

6 Best RV Grill Mount in 2026: A Practical Camping Guide

Six RV grill mounts and rail brackets compared by mounting point, rail size and compatible grill, for bumpers, grill rails and ladder-side setups.

Danny WalkerBy Danny WalkerCamping Editor at RV Gear Lab6 products comparedSpec-sheet researched

At a glance

Our top picks

Mounting a grill on the outside of an RV gets the heat, grease and propane off the picnic table and out of the way of kids and dogs. It also frees the camp table for plates. The challenge is that every mount is built for a specific location and a specific grill, so the best choice depends on where you plan to hang the grill.

There are three families here. A bumper swing arm bolts to a 4 inch bumper and swings a grill out behind the trailer, a rail bracket clamps to a round or square railing such as a ladder or boat rail, and a mounting rack is a brand-specific plate for a particular grill. One pick is a rail-hung table that adds a prep shelf next to the grill. Whichever style you pick, plan where the propane cylinder will sit before you drill any holes.

Compatibility is the whole decision. Match the mount to your grill brand, the part number where one is given, and the rail diameter or bumper size you have, since a wrong fit means a return. Always check that the structure you are mounting to is rated for the weight of a grill and its propane.

RV Gear Lab field notes

The Campsite Fit Check

Start with the job
KUAFU RV Bumper Grill Mount Swing Arm Universal for RVs Campers Trailers leads this shortlist for Bumper-mounted grill stations. Use that fit as a reference point, then compare the alternatives against your own space and workload.
Specs that separate the picks
The first details to compare are Universal fit for 4 in bumpers, Part number 58182, two sets, Part number 58182. Confirm the exact model and included components before ordering.
Trade-off to plan for
Grill must come off before travel

Before you buy

What Matters Before You Choose an RV Grill Mount

Key buying criteria so you get the right fit the first time.

  1. 01

    Mounting location

    A grill can mount on a bumper, a ladder or side rail, or a brand-specific rack. The KUAFU Swing Arm is a bumper unit, the KINTLE 2-Set Bracket and KitchenKipper 58182 clamp to railings, and the Flame King Rack is for Flame King grills. Choosing the wrong location means the mount does not fit at all. Decide where the grill should sit and shop within that group.

  2. 02

    Bumper strength

    A grill on a bumper adds weight and bounce, so the bumper must be a sturdy, fully welded steel unit. Many trailer bumpers are thin, tack-welded or aluminum and are not rated for added load. The KUAFU is made for 4 inch bumpers, but the bumper itself must carry the load. Check the bumper's rating with the manufacturer before bolting a swing arm to it.

  3. 03

    Rail diameter and shape

    Rail brackets clamp to a specific tube size. The KINTLE 2-Set and KitchenKipper brackets list 7/8 to 1-1/4 inch round and 1-1/4 inch square rails. A bracket that is too loose will slip, and one that is too tight will not seat. Measure the rail with calipers or a tape and compare with the range in the listing. Round and square tubing behave differently under a clamp, so confirm the shape as well as the diameter.

  4. 04

    Grill brand and part number

    Some mounts, such as the Kuuma part 58182 brackets or the Flame King rack, are made for one grill family. The hook or plate on a mount must match the grill's hanging points. A universal claim often fits only some models. Look for the grill brand or part number in the title and compare it with your grill.

  5. 05

    Material and finish

    A mount lives outdoors and holds weight, so steel with a powder coat or aluminum is the sturdy choice. Plastic is fine for a table but not for a load-bearing arm. Rust or a bent arm is a safety problem near propane. Check for automotive grade or 100 percent steel claims and a coating. Aluminum will not rust but can dent, while steel needs an intact coating to stay clean.

  6. 06

    Weight and propane safety

    A grill and a propane cylinder add real weight, and a mount near the door or awning increases fire risk. Keep the grill clear of fabric and vents, and remove the grill and fuel before driving. The KUAFU notes that you should store the grill plate and accessories and secure the arm when done. Follow the mount maker's instructions on weight and location.

Our standards

Why You Can Trust RV Gear Lab

At RV Gear Lab, we compare products based on campsite fit, verified specifications, usability, setup requirements, weight, durability, and real-world trade-offs. We do not rank products purely on marketing claims or commission rates.

We have not personally tested every product listed. Where hands-on testing is not available, recommendations are based on verified manufacturer specifications, product documentation, use-case fit, and comparative research.

How we review camping gear →

Detailed reviews

The 6 best rv grill mount, explained

01
KUAFU RV Bumper Grill Mount Swing Arm Universal for RVs Campers Trailers
  • Universal fit for 4 in bumpers
  • Automotive grade steel, powder coat
  • Swing arm with install hardware
Check price on Amazon for KUAFU RV Bumper Grill Mount Swing Arm Universal for RVs Campers Trailers (opens in a new tab)
Best for: Bumper-mounted grill stations

Our take

It suits owners with a trailer that has a strong 4 inch bumper and who want a grill station away from the door and awning.

Why it made the shortlist

The KUAFU is a universal swing arm for 4 inch bumpers on RVs, campers and trailers. It is built from automotive grade steel with a black powder-coat finish for rigidity and rust resistance, and it carries grill tables and grill pans.

Unlike the rail brackets in this guide, it lets you swing the grill away from the trailer and lock it back against the bumper for travel. The package includes the installation hardware and assembly instructions, with a screw-fixed installation.

The steel arm gives the most flexible placement of any mount here.

What works

  • Swing arm moves the grill clear of the door
  • Automotive grade steel with powder-coat finish
  • Hardware and instructions included
  • Carries grill tables and grill pans

Watch out for

  • Grill must come off before travel
02
Best for: Kuuma grills on a rail

Our take

It suits owners of a Kuuma grill who have a ladder or boat-style rail and want a secure, outboard mounting.

Why it made the shortlist

The KINTLE is a two-set replacement grill rail mount bracket, part 58182, that fits any Kuuma grill. It works on 7/8 inch to 1-1/4 inch round horizontal railings or 1-1/4 inch square railings, and it includes the accessories shown in the listing photos.

It hangs the grill outside the railing, which protects fiberglass from leaks and splashes. Against the KitchenKipper bracket, which uses the same part number, it ships as two sets, so you can outfit two grills or keep a spare.

Installation means placing the mounts on the rail and putting screws through them.

What works

  • Two sets in the box, one spare
  • Fits round rails from 7/8 to 1-1/4 inch
  • Also fits 1-1/4 inch square rails
  • Keeps grease off fiberglass

Watch out for

  • Built for Kuuma grills only
  • Needs a suitable railing on the rig
03
Best for: Replacing one Kuuma bracket

Our take

It suits owners who need one replacement bracket for a Kuuma Stow N Go grill and want it at a modest price.

Why it made the shortlist

The KitchenKipper is a Stow N Go grill rail mount bracket, part 58182, for any Kuuma Stow N Go grill. It fits 7/8 inch to 1-1/4 inch round horizontal railings or 1-1/4 inch square railings, and it is made from aluminum with hardware included.

The outboard hang protects fiberglass from leaks and splashes.

What works

  • Aluminum resists rust outdoors
  • Hardware included for installation
  • Fits round and square railings

Watch out for

  • One bracket kit, no spare set
  • Made for Kuuma Stow N Go grills
04

Best for Flame King · 4 of 6

Flame King RV

Flame King RV
  • 100% steel mounting rack
  • For Flame King grill or griddle
  • Compact and portable
Check price on Amazon for Flame King RV (opens in a new tab)
Best for: Flame King grill owners

Our take

It suits owners who already own a Flame King grill or griddle and want a purpose-built mount.

Why it made the shortlist

The Flame King mounting rack lets you mount a Flame King portable propane grill or flat top griddle on an RV, camper or trailer. It is made of 100 percent steel and is compact and portable.

It is the brand-specific option in the guide, built to carry a Flame King flat top or RV grill, which are sold separately. Against the KUAFU Swing Arm it costs less and is made for one family of grills.

What works

  • Made of 100 percent steel for durability
  • Purpose-built for Flame King grills and griddles
  • Compact and portable design
  • Costs less than the KUAFU Swing Arm

Watch out for

  • Grill is sold separately
  • Limited to Flame King products
05

Best Companion Shelf · 5 of 6

Camco RV Rail Mount Table

Camco RV Rail Mount Table
  • 16 13/16 by 12 11/16 in table
  • Hooks and holes for utensils
  • Foldable leg for storage
Check price on Amazon for Camco RV Rail Mount Table (opens in a new tab)
Best for: A prep shelf beside the grill

Our take

It suits owners who already have a grill rail and want a prep surface next to it.

Why it made the shortlist

The Camco rail mount table hangs on an RV's exterior grill rail and gives a flat surface for food prep, eating and keeping utensils handy. It is made of heavy-duty plastic and measures 16 13/16 inches wide by 12 11/16 inches deep by 5 inches tall with the leg extended.

Hooks and holes hang grill utensils, and a hole on each side takes a roll of paper towels with a bungee.

What works

  • Flat surface for plates and condiments
  • Hooks and holes hang grill utensils
  • Foldable leg stores flat
  • Paper towel holes on each side

Watch out for

  • Does not mount a grill
  • Plastic suits lightweight items only
06
16 1/2-inch 57268 RV Mounting Rail for Grill
  • 16 1/2 in rail, part 57268
  • Screws included
  • Fits portable grills and accessories
Check price on Amazon for 16 1/2-inch 57268 RV Mounting Rail for Grill (opens in a new tab)
Best for: Replacement side rail for grills

Our take

It suits owners replacing or adding a side-mounted grill rail on a camper.

Why it made the shortlist

The FancyTark is a 16 1/2 inch RV mounting rail, part 57268, for hanging portable grills and accessories on the side of an RV. It includes the installation screws and is made to withstand outdoor conditions.

It is the lowest priced item here and the simplest, a rail rather than a full bracket system. It frees interior space by putting the grill outside, and it is compatible with a range of portable grills and accessories.

What works

  • Installation screws included
  • Frees interior space
  • Works with several portable grills

Watch out for

  • Material is not detailed on the listing
  • Fit depends on the grill's hanging style

Methodology

How We Built This Shortlist

Each pick was assessed across 5 criteria weighted for real-world use.

01

Mounting location

We separated bumper arms, rail brackets, grill-specific racks and the rail table, since each attaches in a different place. Fit to your rig comes before any other feature. A mount that works on one rig can be useless on another, so we gave placement the most weight.

02

Rail and bumper size

We compared the 4 inch bumper fit and the 7/8 to 1-1/4 inch round and 1-1/4 inch square rail range. A stated size tells you the mount will seat on your structure.

03

Grill compatibility

We checked brand and part number claims such as Kuuma 58182 and Flame King. A named fit beats a general universal claim.

04

Material and finish

We looked at automotive grade steel, 100 percent steel, aluminum and plastic. The load-bearing part should be metal.

05

Hardware included

We counted screws, brackets and instructions in the package contents. A mount that arrives complete saves a hardware store trip.

Decision guide

Match an RV Grill Mount to Your Camp Setup

By Mounting Point

Your situationRecommended pickWhy
Strong 4 inch bumperKUAFU Swing ArmA steel swing arm for 4 inch bumpers carries a grill table or pan.
Ladder or side rail, Kuuma grillKINTLE 2-Set BracketTwo 58182 brackets fit 7/8 to 1-1/4 inch round or square rails.
Single Kuuma bracket replacementKitchenKipper 58182One aluminum 58182 bracket kit with hardware is enough.
Flame King grill or griddleFlame King RackA 100 percent steel rack is built for Flame King units.
Side rail replacementFancyTark RailA 16 1/2 inch rail with screws hangs portable grills.

By Budget

BudgetRecommended pick
Entry of this shortlistFancyTark Rail or KitchenKipper 58182
Mid of this shortlistKINTLE 2-Set Bracket or Flame King Rack
Top of this shortlistCamco Rail Table or KUAFU Swing Arm

Bumper Arm vs Rail Bracket

Bumper arm

The KUAFU Swing Arm moves the grill away from the trailer and locks back for travel. It needs a strong bumper and takes the grill off the side of the rig.

Rail bracket

The KINTLE 2-Set Bracket and KitchenKipper 58182 hang a grill from an existing rail. They are simple but need a rail of the right size.

Choose the KUAFU Swing Arm if you have a 4 inch bumper, or the KINTLE 2-Set Bracket if you have a ladder rail.

By Grill Brand

Grill brandRecommended pick
Kuuma grillsKINTLE 2-Set Bracket
Kuuma Stow N Go grillKitchenKipper 58182
Flame King flat top or grillFlame King Rack
Mixed portable grillsFancyTark Rail

For Small Campsites Specifically

Look for

Look for a mount that holds the grill off to the side and a prep shelf so the picnic table stays free.

In this comparison

The KINTLE 2-Set Bracket hangs a Kuuma grill outside the rail, and the Camco Rail Table adds a flat surface next to it.

When to Spend More

Spend more if

Spend more on the KUAFU Swing Arm for a steel bumper station that swings clear of the door. The Flame King Rack is the step up when you own a Flame King grill.

Save if

Save with the FancyTark Rail or KitchenKipper 58182 when a simple rail or single bracket is enough. The Camco Rail Table is a modest add-on for prep space.

FAQ

Before You Bring One Home

Can I mount a grill on my trailer bumper?

Only if the bumper is a square, fully welded steel unit rated for the extra weight. Many trailer bumpers are thin, tack-welded or aluminum and are not suitable. The KUAFU Swing Arm is made for 4 inch bumpers, but confirm the bumper rating first. A bumper that bounces on rough roads will also bounce a grill mount, so most owners remove the grill for travel.

How do I know which rail bracket fits my grill?

Match the grill brand and part number, such as 58182 for Kuuma. Then measure the rail against the 7/8 to 1-1/4 inch round or 1-1/4 inch square range. The KINTLE 2-Set Bracket and KitchenKipper 58182 list that range.

Is the KINTLE two-set worth it over the single bracket?

The KINTLE 2-Set Bracket gives two sets for the same part number, which is handy for a spare or a second grill. The KitchenKipper 58182 is one kit at a lower price. Pick by how many brackets you need.

How do I install a rail mount?

Place the bracket on the rail at the spot you want, then put the screws through the mount as the instructions show. Tighten until the bracket sits firm. Check it again after your first trip.

Is it safe to grill next to the RV?

Keep the grill well clear of the awning, door and vents, and never grill under fabric. Follow the grill and mount instructions on location. Remove the grill and propane before you drive. Wind can carry sparks and grease, so choose a spot where the grill sits downwind of the door.

Can the Camco table hold a grill?

No, the Camco Rail Table is a flat prep surface of heavy-duty plastic for plates, condiments and utensils. It suits lightweight items only. Use a proper mount for the grill itself. Its foldable leg lets it tuck away flat when the trip ends.

Bottom line

The short version

Browse more rv grill mount on Amazon →
Danny Walker, Camping Editor at RV Gear Lab

About the author

Danny Walker

Camping Editor at RV Gear Lab

Danny covers camping gear, campsite setup, outdoor power, sleep systems and practical camping advice, with a focus on helping campers make better gear decisions.

More from Danny →Editorial standards

Keep reading

Related guides