We research everything we recommend. When you buy through our links, we may earn a commission. Learn more

Buying guide · 10 min read · Updated October 2, 2026

6 Best RV Cup Holder in 2026: A Practical RV Guide

RV cup holders in wall-mount, drop-in, foldable and foam styles, matched to tumbler size and road vibration for campers, trailers and motorhomes.

Bowen HigginsBy Bowen HigginsRV Editor at RV Gear Lab6 products comparedSpec-sheet researched

At a glance

Our top picks

Drinks are the one thing in a camper that always seems to end up on a surface that is about to move. A good cup holder gives a mug or tumbler a fixed home beside the sofa, the bed or the dinette, so nothing slides when the road turns rough or someone stands up too fast.

Holders come in four shapes: bolt-on wall cups, drop-in inserts that sit in a drilled hole, fold-away arms that stow flat, and foam trays for the moving coach. Which style fits depends mostly on how big your cups are and whether you are willing to drill, so the list is organised around those two decisions.

Each holder was evaluated by comparing its stated opening diameter and adjustment range with the bottles and tumblers common in RVs, then by how it mounts, how it handles drainage and whether it works while the rig is moving.

RV Gear Lab field notes

The Rig Fit Check

Start with the job
Universal Large Cup Holder Wall Mount leads this shortlist for Large tumblers beside the sofa or bunk. Use that fit as a reference point, then compare the alternatives against your own space and workload.
Specs that separate the picks
The first details to compare are 3.7 inch top, 3.2 inch base, 2.36 to 3.94 inch adjustable, Adjustable arms, 3.5 inch listed. Confirm the exact model and included components before ordering.
Trade-off to plan for
Requires drilling into a wall or panel

Before you buy

What Matters Before You Choose an RV Cup Holder

Key buying criteria so you get the right fit the first time.

  1. 01

    Cup opening diameter

    The opening is the part that has to match your cup. Large insulated tumblers and many bottles are wider than a standard can, and a holder that is too narrow simply will not take them. The JAZBREY tapers from 3.7 to 3.2 inches, while the JOYTUTUS wants a base of 3.74 to 4.1 inches. Measure the base of your most-used cup and compare it with the listed range before ordering.

  2. 02

    Fixed versus adjustable grip

    A fixed cup is simple and sturdy, but it only suits one range of sizes. Adjustable arms, as on the Spurtar and Camco, resize to slim cans and big bottles alike. The catch is that arms need setting by hand and are not spring-loaded, so they can loosen on rough roads. If your family uses mixed drinkware, adjustable arms are the practical choice in a parked rig.

  3. 03

    Mount style and surface

    Wall mounts want a flat surface and a screw, drop-ins want a hole, and trays want only a shelf. RV walls are thin, so a screw-in holder may need backing behind the panel to stay put with a heavy tumbler. Drop-ins like the Yuanhe need a cut-out around 4.25 inches wide for the flange. Check the listing for pre-drilled holes, the screw type and whether the instructions mention the surface thickness.

  4. 04

    Drainage and cleaning

    A cup holder collects spills, condensation and crumbs. A recessed holder without a drain will keep a puddle, while the Yuanhe has drain holes that let moisture escape. A smooth plastic surface wipes clean in seconds, whereas a textured finish traps sugar. Look for drain holes or a flat inside bottom in the listing.

  5. 05

    Behaviour on the move

    Most cup holders are designed for parked use. A wall cup holds a tumbler upright but will not stop a cup from tipping on a sharp turn, and arms that rely on friction can loosen with vibration. The Generic foam tray is built with eight separate slots and a non-slip base so drinks ride quietly. For travel days, put drinks in a holder that is stable on its own and not just clipped to the wall.

  6. 06

    Pack size and hardware

    A pair of holders is usually enough for a sofa, but a dinette or bunk area needs more. The JOYTUTUS and Yuanhe each come as four, the Spurtar as two, and the Camco as one. Screws are included in most wall mount listings, though drop-ins may not need any at all. Count your seating spots first, then compare the number of pieces and the hardware included.

Our standards

Why You Can Trust RV Gear Lab

At RV Gear Lab, we compare products based on rig fit and power or hookup compatibility, verified specifications, usability, setup requirements, weight, durability, and real-world trade-offs. We do not rank products purely on marketing claims or commission rates.

We have not personally tested every product listed. Where hands-on testing is not available, recommendations are based on verified manufacturer specifications, product documentation, use-case fit, and comparative research.

How we review RV gear →

Detailed reviews

The 6 best rv cup holder, explained

01
Universal Large Cup Holder Wall Mount
  • 3.7 inch top, 3.2 inch base
  • 4 mm ABS, stainless screws
  • Horizontal or vertical mount
Check price on Amazon for Universal Large Cup Holder Wall Mount (opens in a new tab)
Best for: Large tumblers beside the sofa or bunk

Our take

That makes it the most capable all-round pick for anyone who drinks from a big insulated tumbler.

Why it made the shortlist

The JAZBREY is a wall mount cup holder with a top opening of 3.7 inches and a bottom of 3.2 inches, a taper that grips large tumblers and most bottles. It is moulded from 4 millimetre ABS plastic and comes as a pair.

Unlike the drop-in inserts, it screws to a wall or panel in either a horizontal or vertical orientation, which makes it useful beside a sofa, a bunk or a dinette. Stainless steel screws resist rust, and pre-drilled holes make mounting quick on wood, plastic or wall surfaces.

Compared with the Spurtar and Camco foldables, it is a fixed, no-moving-parts holder, so it holds a tall cup steadily without any arms to adjust.

What works

  • Wide taper fits large tumblers and most bottles
  • Thick 4 mm ABS shrugs off daily use
  • Mounts horizontally or vertically on many surfaces
  • Rustproof stainless screws and pre-drilled holes

Watch out for

  • Requires drilling into a wall or panel
  • Fixed design takes up space even when empty
02

Best Adjustable Fit · 2 of 6

Spurtar 2pcs Boat Cup Holder 2.36''-3.94''

Spurtar 2pcs Boat Cup Holder 2.36''-3.94''
  • 2.36 to 3.94 inch adjustable
  • Folds to 0.91 inch deep
  • 2 holders with screws
Check price on Amazon for Spurtar 2pcs Boat Cup Holder 2.36''-3.94'' (opens in a new tab)
Best for: Mixed cup sizes in a parked camper

Our take

It fits owners who want one holder for mugs, cans and bottles of different widths in a parked camper.

Why it made the shortlist

The Spurtar is a pair of foldable cup holders whose retainer arms adjust from 2.36 to 3.94 inches in diameter, which spans slim cans through large water bottles.

Where the JAZBREY is a fixed cup, this one resizes to the drink and tucks away when not in use. It mounts with screws on any suitable flat surface and comes with the hardware.

For a sofa or bedside in a rig that stays put, it stows neatly when the table is needed.

What works

  • Arms adjust from slim cans to large bottles
  • Folds flat to just under an inch deep
  • Two holders in the pack
  • Screws included for flat surfaces

Watch out for

  • Arms adjust manually and are not spring-loaded
  • Best in parked rigs, not on rough roads
03

Best RV Brand Pick · 3 of 6

Camco Camper/RV Drink Holder

Camco Camper/RV Drink Holder
  • Adjustable arms, 3.5 inch listed
  • Folding polymer design
  • 4 screws included
Check price on Amazon for Camco Camper/RV Drink Holder (opens in a new tab)
Best for: One extra holder beside a seat

Our take

For cargo vans and car-based campers it also works as a quick add-on.

Why it made the shortlist

The Camco is a single folding drink holder from an RV accessory brand, with adjustable arms made to hold most mugs, cans and bottles up to about 3.5 inches. The polymer construction is durable, and four screws come with it for mounting.

Mounting is on any smooth surface in minutes.

What works

  • Adjustable arms fit mugs, cans and bottles
  • Folds away to save wall space
  • Comes with four screws for quick install
  • Made by a well-known RV accessory maker

Watch out for

  • Single holder, so you need more for a group
  • Arm adjustment is by hand each time
04
JoyTutus Cup Holder Insert 2pcs for RV Boat Car Couch Golf Cart
  • 4 inserts, chrome finish
  • 3.74 to 4.1 inch base fit
  • Fits Hydro Flask and Yeti
Check price on Amazon for JoyTutus Cup Holder Insert 2pcs for RV Boat Car Couch Golf Cart (opens in a new tab)
Best for: Built-in holders for tumblers and big bottles

Our take

It is the pick when you plan to cut a hole in a countertop or a sofa arm and want the holder flush.

Why it made the shortlist

The JOYTUTUS is a set of four chrome-finish drop-in inserts designed for a cup base from 3.74 to 4.1 inches in diameter, with cups up to 3.55 inches wide. That range suits Hydro Flask and Yeti Rambler style bottles.

The pack of four covers a dinette and lounge in one purchase.

The listing is clear about which cups will not fit, including Venti and Trenta sizes, so a quick measurement avoids a wrong order.

What works

  • Four-piece pack covers a whole dinette
  • Chrome finish looks neat on furniture
  • Fits large Hydro Flask and Yeti bottles
  • Flush drop-in design stays out of the way

Watch out for

  • Needs a cut-out hole sized to the base
  • Does not fit Venti or 32 oz Contigo cups
05
Best for: Outdoor tables and wet areas

Our take

It is a sound choice for an outdoor kitchen table, a camper table or a boat style countertop where spilled drinks and rain are a fact of life.

Why it made the shortlist

The Yuanhe is a set of four black plastic inserts with a recessed design and drain holes in the bottom, so any moisture runs out rather than pooling. The body is 3.5 inches high with a 3.5 inch inside diameter and a 4.25 inch outer diameter with flange.

No mounting screws are needed, which makes them a quicker install than the JAZBREY wall cups once a hole sized to the 4.25 inch outer diameter is cut. The smooth plastic surface is easy to wipe clean.

Because they drain, they do not stay wet after a washdown.

What works

  • Drain holes let moisture escape
  • No mounting screws required
  • Four in a pack for a table or counter
  • Smooth plastic wipes clean fast

Watch out for

  • 3.5 inch opening is tight for big tumblers
  • Needs a hole cut to the outer diameter
06

Best for Driving · 6 of 6

RV Cup Holder Organizer

Best for: Several drinks riding in a moving rig

Our take

It is the right call for families or groups who stage several drinks before departure and want them to ride without tipping.

Why it made the shortlist

The Generic foam organizer is an eight-slot tray that holds drinks upright on a non-slip base, and its soft foam protects ceramic mugs from knocking together.

Unlike the wall and insert styles, it needs no drilling and sits on a counter, a shelf or the floor of a cabinet. Eight individual slots eliminate cup bumping on bumpy roads, which keeps the cabin quieter.

It also stores neatly when the trip is over.

What works

  • Eight slots hold a group's drinks at once
  • Non-slip base stays put on bumpy roads
  • Soft foam protects ceramic mugs
  • No drilling or mounting needed

Watch out for

  • Bulky compared with a single wall holder
  • Takes up counter or shelf space

Methodology

How We Built This Shortlist

Each pick was assessed across 5 criteria weighted for real-world use.

01

Opening size and range

We evaluated each holder's stated diameter, whether fixed or adjustable, against the bottles and tumblers common in RVs. Where a listing gives a base range, it counts for more than a vague claim to fit most cups.

02

Mounting method

We compared wall mount, drop-in, foldable and tray styles by how much drilling each needs and which surfaces it suits. A no-drill option scores well for renters and for thin RV panels.

03

Stability when moving

Some holders are built for a moving coach and some only for parked use, so we checked each listing for notes on road motion and what holds the cup in place.

04

Materials and weather

ABS thickness, stainless screws and drain holes were compared, since a camper cup holder meets heat, spills and damp.

05

Pack contents

Pack size and included hardware matter in a space with several seating spots, so a set of four or a pair was weighed against a single unit.

Decision guide

Match an RV Cup Holder to Your RV

By Cup Type

Your situationRecommended pickWhy
Large insulated tumblersJAZBREY Wall Mountits 3.7 inch top opening tapers to 3.2 inches for a firm hold
Hydro Flask or Yeti style bottlesJOYTUTUS Drop-Inthe 3.74 to 4.1 inch base range is sized for large bottles
Mixed cans, mugs and bottlesSpurtar Foldablearms adjust from 2.36 to 3.94 inches for any cup
Standard mugs and cans, one holderCamco Drink Holderadjustable arms fold flat beside a seat
Fragile ceramic mugs and a groupGeneric Foam 8-Slotsoft foam slots protect cups and keep eight drinks upright

By Budget

BudgetRecommended pick
Entry of this shortlistCamco Drink Holder or Spurtar Foldable
Mid of this shortlistGeneric Foam 8-Slot or Yuanhe Drain Insert
Top of this shortlistJOYTUTUS Drop-In or JAZBREY Wall Mount

Wall Mount vs Drop-In

Wall mount

The JAZBREY Wall Mount, Spurtar Foldable and Camco Drink Holder screw onto a flat surface and are quick to place on walls and bed frames. They need only a screwdriver, though you still drill small pilot holes.

Drop-in

The JOYTUTUS Drop-In and Yuanhe Drain Insert sit flush in a hole cut in a table, counter or sofa, which looks built-in. They need a cut-out sized to the flange, so there is more commitment up front.

Choose the JAZBREY Wall Mount for the simplest, strongest install, and the JOYTUTUS Drop-In if you are cutting a hole anyway.

By Setting

Where it goesRecommended pick
Outdoor table or wet areaYuanhe Drain Insert
Bunk, sofa or recliner sideSpurtar Foldable
A single extra spotCamco Drink Holder
Counter that travels with the rigGeneric Foam 8-Slot

For Travel Days Specifically

Look for

Stable slots with a non-slip base, so cups cannot tip when braking or turning, rather than arms that rely on hand adjustment.

In this comparison

The Generic Foam 8-Slot is the one pick built for the moving coach, with eight slots that stop cups bumping together. The Spurtar Foldable is designed for low-motion use, so it is better saved for camp.

When to Spend More

Spend more if

Spend more on the JAZBREY Wall Mount, the most expensive pick on this shortlist, for a thick ABS body that takes a big tumbler, or the JOYTUTUS Drop-In if you want built-in holders in a set of four.

Save if

Save with the Camco Drink Holder, the entry pick here, or the Spurtar Foldable pair, which adjust to many cup sizes at a low cost.

FAQ

Before You Bring One Home

How do I check whether a tumbler will fit a holder?

Measure the width of the cup at its base and at its widest point, then compare it with the listed range. The JAZBREY handles roughly 3.2 to 3.7 inches, while the JOYTUTUS wants a base of 3.74 to 4.1 inches. Adjustable arms like the Spurtar cover 2.36 to 3.94 inches. If a tumbler has a wide lip or handle, add clearance for that too.

Can I use these holders while the RV is moving?

Most are designed for a parked coach. The Spurtar Foldable is described as best for low-motion settings, and wall cups depend on how snugly the cup sits. The Generic Foam 8-Slot is the pick intended for rough roads, with non-slip slots that keep drinks from bumping. For safety, put drinks in a lidded cup on driving days.

Is a drop-in insert worth the extra work over a wall mount?

If you are already cutting a hole in a table or sofa arm, the JOYTUTUS Drop-In or Yuanhe Drain Insert looks neat and sits flush. The Yuanhe also drains, which helps on outdoor tables. A wall mount like the JAZBREY is faster and needs no cut-out. Pick the insert for appearance and the wall mount for speed.

How should I mount a cup holder to a thin RV wall?

Locate a stud or add a thin wooden backer behind the panel so the screws grip. The JAZBREY comes with stainless screws and pre-drilled holes, which makes marking the spots simple. Use a level to keep the holder true, and test with a full cup before relying on it.

What is the easiest way to clean a cup holder?

A damp cloth takes care of most ABS or plastic holders. The Yuanhe drain holes let water run out, so rinsing in place works. For the Generic foam tray, spot clean with mild soap and let it air dry. Avoid soaking foam, which holds moisture.

Which holder suits a bunk or bedside?

The Spurtar Foldable is a strong choice since it folds to about 0.91 inch and clears the wall when you are not using it. The Camco Drink Holder offers the same fold-away idea as a single unit. Both mount with screws, so check that the wall has solid backing.

Bottom line

The short version

Browse more rv cup holder on Amazon →
Bowen Higgins, RV Editor at RV Gear Lab

About the author

Bowen Higgins

RV Editor at RV Gear Lab

Bowen covers RV power, water systems, towing and leveling, upkeep and interior comfort, with a focus on matching gear to the rig, the hookups and the way you actually travel.

More from Bowen →Editorial standards

Keep reading

Related guides