We research everything we recommend. When you buy through our links, we may earn a commission. Learn more

Buying guide · 10 min read · Updated October 2, 2026

6 Best RV Ladder Bike Rack in 2026: A Practical RV Guide

Six RV ladder bike racks compared by tube fit, weight limit and swing-away design, for hauling bikes on a camper or van ladder without losing rear access.

Bowen HigginsBy Bowen HigginsRV Editor at RV Gear Lab6 products comparedSpec-sheet researched

At a glance

Our top picks

The rear ladder on a camper or motorhome is prime real estate for bikes. It keeps them off the receiver, clears the bumper for a cargo carrier and takes advantage of a spot that is already bolted to the body. A ladder rack clamps to the rungs or rails and holds one or two bikes against the back wall of the coach. It also keeps the bikes close to the body, which reduces the leverage on the mount compared with a long hitch arm.

The trade-off is weight. Ladder racks rate in the range of 50 to 100 lb, far below a hitch platform, and the ladder itself has its own limit that the rack must respect. That points toward lighter bikes, and it makes the tube size and the clamping method important details, since a rack that slips on a round tube will not hold a bike for long.

The six picks below are ordered by how clearly each states its fit and weight limits. Swing-away or pivoting arms matter because they let you use the ladder to climb to the roof without removing the bikes. Each pick is described by the numbers its listing gives, so you can compare tube fit and weight limits directly.

RV Gear Lab field notes

The Rig Fit Check

Start with the job
Surco A501BR Ladder Mounted Swing Away 2-Bike Rack leads this shortlist for Two bikes on a 1 inch tube ladder. Use that fit as a reference point, then compare the alternatives against your own space and workload.
Specs that separate the picks
The first details to compare are Fits 1 inch round tube ladders, Fits van and RV ladders, 50 lb weight capacity. Confirm the exact model and included components before ordering.
Trade-off to plan for
Fits only 1 inch round tube ladders

Before you buy

What Matters Before You Choose an RV Ladder Bike Rack

Key buying criteria so you get the right fit the first time.

  1. 01

    Ladder tube size and shape

    Ladder racks clamp to tubing, and the tube size and shape decide fit. The Surco models fit a 1 inch round tube, and the Camco Clamp-N-Carry fits 1 inch and 7/8 inch with adapters. A rack on the wrong size will rotate or slide. Measure your ladder rail and compare to the listing before you order. Ladders on some coaches have flat rails or odd shapes, and those need a different clamp entirely, so a quick photo of your ladder beside the listing is worth the minute.

  2. 02

    Weight rating

    Limits here run from 50 lb to 100 lb total, which is a fraction of a hitch rack. Two adult bikes can exceed that quickly, and e-bikes will. The ladder itself also has a limit and so does the wall it bolts to. Add up the bikes and check the stated rating. Also remember that the rack itself has weight, so a 50 lb limit may leave room for only one light bike once the arms and straps are counted.

  3. 03

    Swing-away arms

    Pivoting arms let you reach the roof ladder with the bikes in place or take them off without removing the rack. A fixed rack blocks the ladder. This matters on a coach where you climb for the roof often. Look for words like swing, pivot or fold. Swing-away arms also help in a campground, where you can lower the arms and fetch gear from the roof without unloading anything.

  4. 04

    Cradle shape and padding

    Cradles hold the frame, and padding protects paint. Short arms or narrow cradles may not suit large frames or fat tires. The listing for the Stromberg Carlson LA-102 states the arm length and cradle spacing. Compare those to your bike.

  5. 05

    Material and corrosion

    Aluminum is light and resists corrosion, steel is strong and can rust, and nylon is light and UV treated. A rack lives outside on the back of the rig. Check the material and finish named on the listing. Compare the numbers on the listing against your own ladder and bikes before you order.

  6. 06

    Locking and security

    A bike on a ladder is easy to take if nothing locks it. A lock point or padlock hole, as on the Camco Clamp-N-Carry, adds protection. A cable-attached pin keeps parts from getting lost. Look for lock details on the listing. Remember that a lock deters casual theft but a determined thief with tools can still cut a cable, so park where the rig is visible.

Our standards

Why You Can Trust RV Gear Lab

At RV Gear Lab, we compare products based on rig fit and power or hookup compatibility, verified specifications, usability, setup requirements, weight, durability, and real-world trade-offs. We do not rank products purely on marketing claims or commission rates.

We have not personally tested every product listed. Where hands-on testing is not available, recommendations are based on verified manufacturer specifications, product documentation, use-case fit, and comparative research.

How we review RV gear →

Detailed reviews

The 6 best rv ladder bike rack, explained

01
Surco A501BR Ladder Mounted Swing Away 2-Bike Rack
  • Fits 1 inch round tube ladders
  • Aluminum, swing-away arms
  • Padded cradles, two bikes
Check price on Amazon for Surco A501BR Ladder Mounted Swing Away 2-Bike Rack (opens in a new tab)
Best for: Two bikes on a 1 inch tube ladder

Our take

A cable-attached locking pin keeps the arms in place.

Why it made the shortlist

The Surco A501BR is a ladder-mounted swing-away rack for two bikes that fits any 1 inch round tube van or RV ladder. It is built from 1 inch heavy-gauge aluminum tubing with an anodized finish and pivoting aluminum hinges, and the polished look is corrosion resistant.

Compared with the Camco Folding Steel, it uses aluminum and built-in padded cradles with securing straps that hold bikes without scratching. The arms swing out of the way for full ladder access, and two-position swivel brackets make setting them up simple with allen head fasteners. That polished anodized finish also cleans up easily after a muddy trip.

It is the right fit for owners with a 1 inch tube ladder who want a polished, corrosion-resistant two-bike rack.

What works

  • Aluminum build resists corrosion
  • Arms swing away for ladder access
  • Padded cradles protect bike frames
  • Locking pin is attached by cable

Watch out for

  • Fits only 1 inch round tube ladders
02

Best Made in USA · 2 of 6

Surco 501BR Ladder Mounted Bike Rack

Best for: Quick no-strap mounting

Our take

It is a good match for owners who want a USA-made rack that goes on without tools and swings aside for the ladder.

Why it made the shortlist

The Surco 501BR is a ladder-mounted bike rack made in the USA that fits the ladder of any van or RV and carries two bikes. Its pivoting arms allow easy access to the ladder when the bikes are off.

It mounts without straps or ladder removal, which makes installation quicker than a clamp that has to be taken apart. It belongs to the same Surco design family as the A501BR, at a slightly lower outlay.

Skipping the strap-and-remove routine makes it the easiest of the Surco pair to fit.

What works

  • Made in the USA
  • Mounts without straps or removing the ladder
  • Pivoting arms free the ladder
  • Carries two bikes

Watch out for

  • Few specs on the listing
03
Stromberg Carlson LA-102 1-Inch Bike Rack for Universal Ladder
  • 50 lb weight capacity
  • 13 inch bike arm length
  • 9 inch maximum cradle spacing
Check price on Amazon for Stromberg Carlson LA-102 1-Inch Bike Rack for Universal Ladder (opens in a new tab)
Best for: Light bikes with known dimensions

Our take

It is a fit for light bikes on a 1 inch ladder where a clearly stated 50 lb limit is welcome.

Why it made the shortlist

The Stromberg Carlson LA-102 is a 1 inch universal ladder bike rack with a stated 50 lb weight capacity. The bike arms extend 13 inches from the bend to the tip, and the maximum distance between cradles is 9 inches.

Those figures give a clear picture of how bikes will sit, which the Surco 501BR leaves unstated. It comes as one complete assembly and suits owners who want to know the geometry before they buy.

What works

  • Stated 50 lb capacity
  • Arm and cradle dimensions are listed
  • Single complete assembly
  • Fits a 1 inch ladder

Watch out for

  • Short arms suit small bikes
  • Only 50 lb total
04

Best Multi-Use · 4 of 6

Thetford RV Ladder Mount System

Thetford RV Ladder Mount System
  • Lightweight aluminum, 50 lb max
  • Metal brackets and screws
  • 85 inch nylon strap
Check price on Amazon for Thetford RV Ladder Mount System (opens in a new tab)
Best for: One rack for a tote, a bike or chairs

Our take

It keeps the waste tote off the interior floor for a more sanitary solution.

Why it made the shortlist

The Thetford ladder mount is a lightweight aluminum universal RV ladder rack that carries portable waste totes, bikes or chairs, with a maximum load of 50 lb. It is secured with metal brackets and screws.

An 85 inch nylon strap ties down the tote, bike or chair. Compared with the Camco Clamp-N-Carry, it is aimed first at SmartTote2 portable waste tanks and treats the bike as a secondary use. The bike use is a bonus on a rack whose main job is keeping a waste tote off the floor.

It suits owners who want one ladder rack that does tote duty and carries a bike.

What works

  • Carries totes, bikes or chairs
  • Aluminum stays light
  • Long 85 inch strap included
  • Metal brackets and screws

Watch out for

  • Primarily a tote carrier
  • Single bike at 50 lb
05
Camco Clamp-N-Carry Lockable RV Ladder Chair and Bike Rack
  • Fits 1 inch and 7/8 inch ladders
  • 50 lb per side, 100 lb total
  • Accepts a 1/8 inch padlock
Check price on Amazon for Camco Clamp-N-Carry Lockable RV Ladder Chair and Bike Rack (opens in a new tab)
Best for: A lockable bike and chair carrier

Our take

It is a good match for owners who want a lockable, tool-free rack that handles bikes and chairs.

Why it made the shortlist

The Camco Clamp-N-Carry holds one bike or four or more folding chairs on an RV or van ladder. It fits most standard 1 inch and 7/8 inch ladders with adapters included, and it mounts without tools.

The rating is 50 lb per side, 100 lb total, in glass-filled nylon with UV inhibitors and zinc-plated hardware.

What works

  • Lockable with a standard padlock
  • Fits two ladder tube sizes
  • Mounts without tools
  • UV-inhibited glass-filled nylon

Watch out for

  • Holds only one bike
  • Nylon is less rigid than aluminum
06
Camco RV Camper Ladder Mount Folding Bike Rack
  • Heavy-duty steel
  • Two bikes, 60 lb combined
  • Form-fit cradles, extra straps
Check price on Amazon for Camco RV Camper Ladder Mount Folding Bike Rack (opens in a new tab)
Best for: Two light bikes on a budget

Our take

It is a smart pick for budget buyers with two light bikes who still want a two-bike rack.

Why it made the shortlist

The Camco folding bike rack is a heavy-duty steel ladder mount that carries two bikes at once with a 60 lb combined limit. It has form-fit cradles to hold the bikes in place and extra straps included.

It is the lowest-priced rack here and fits most standard RV ladders. Compared with the Surco A501BR, it is steel instead of aluminum and states a 60 lb rating.

The heavy-duty steel and included extra straps give it a solid feel for the outlay.

What works

  • Carries two bikes
  • Form-fit cradles hold bikes
  • Extra straps included

Watch out for

  • 60 lb combined limit
  • May not suit smaller framed bikes

Methodology

How We Built This Shortlist

Each pick was assessed across 6 criteria weighted for real-world use.

01

Ladder fit

We compared stated tube sizes, 1 inch and 7/8 inch, since a rack that does not clamp tightly will slip.

02

Weight rating

We compared stated limits, from 50 lb to 100 lb total, and noted listings that give none.

03

Bike count

We separated one-bike racks from two-bike racks and from multi-use carriers.

04

Swing and access

We looked at whether arms pivot away so the ladder stays usable.

05

Security

We noted locking points and pins.

06

Material and finish

We compared aluminum, steel and nylon builds and noted finishes, since a rack on the back of a rig sits in sun, rain and road spray all season.

Decision guide

Match an RV Ladder Bike Rack to Your RV

By Ladder Tube

Your situationRecommended pickWhy
1 inch round tube ladder, two bikesSurco A501BRits 1 inch aluminum tubing fits that ladder with swing-away arms
Van or RV ladder, no toolsSurco 501BRit mounts without straps or ladder removal
1 inch ladder, light bikesStromberg Carlson LA-102its 50 lb rating and arm dimensions are listed
1 inch or 7/8 inch ladderCamco Clamp-N-Carryit ships adapters for both sizes
Standard ladder, tight budgetCamco Folding Steelits two-bike steel rack is the lowest priced

By Budget

BudgetRecommended pick
Entry of this shortlistCamco Folding Steel or Camco Clamp-N-Carry
Mid of this shortlistThetford Ladder Mount or Stromberg Carlson LA-102
Top of this shortlistSurco 501BR or Surco A501BR

Aluminum vs Steel or Nylon

Aluminum

The Surco A501BR and Thetford Ladder Mount stay light and resist corrosion. They cost a bit more.

Steel or nylon

The Camco Folding Steel is strong steel and the Camco Clamp-N-Carry is UV-treated nylon. They are cheaper and still capable.

Choose the Surco A501BR for a polished two-bike rack and the Camco Clamp-N-Carry for locking.

By Gear You Carry

GearRecommended pick
Two bikesSurco A501BR
One bike and folding chairsCamco Clamp-N-Carry
A waste tote or a bikeThetford Ladder Mount
Light bikes with known geometryStromberg Carlson LA-102

For Weekend Campers Specifically

Look for

A tool-free mount, a clear weight limit and arms that swing away for the roof ladder.

In this comparison

The Camco Clamp-N-Carry mounts without tools and locks, and the Surco 501BR goes on without straps.

When to Spend More

Spend more if

Spend more on the Surco A501BR if you want aluminum, padded cradles and swing-away arms for two bikes.

Save if

Save with the Camco Folding Steel or Camco Clamp-N-Carry if your bikes are light and you want the lowest outlay.

FAQ

Before You Bring One Home

How much weight can an RV ladder take?

It depends on the ladder and the wall, and the maker of your RV can tell you. Racks like the Camco Clamp-N-Carry state 100 lb total and the Stromberg Carlson LA-102 states 50 lb. Stay well under both limits.

Will a ladder rack fit a square-rung ladder?

Only if the listing says so. The Surco A501BR names 1 inch round tube and the Camco Clamp-N-Carry names 1 inch and 7/8 inch. Measure the rungs before ordering.

Is the Surco A501BR worth it over the Camco Folding Steel?

If you want aluminum and padded cradles, yes. The Camco Folding Steel is cheaper at a stated 60 lb limit. Choose by budget and finish.

How do I load bikes on a ladder rack?

Swing the arms out, set the bike frame in the cradle and strap it down. Check that the bike clears the roof ladder rails. Lock the pin before driving.

How do I maintain a ladder rack?

Wipe off road grime, check the clamp bolts and replace worn straps. Inspect the Camco Clamp-N-Carry for UV cracks. Retire any rack with a bent arm.

Can I carry an e-bike on a ladder rack?

Almost never. E-bikes often weigh 50 to 70 lb each, which is at or above the stated limit of racks like the Stromberg Carlson LA-102 at 50 lb and the Camco Folding Steel at 60 lb combined. A receiver or bumper platform rated for the weight is the safer choice. Treat a ladder rack as a place for light bikes only.

Bottom line

The short version

Browse more rv ladder bike rack on Amazon →
Bowen Higgins, RV Editor at RV Gear Lab

About the author

Bowen Higgins

RV Editor at RV Gear Lab

Bowen covers RV power, water systems, towing and leveling, upkeep and interior comfort, with a focus on matching gear to the rig, the hookups and the way you actually travel.

More from Bowen →Editorial standards

Keep reading

Related guides