We research everything we recommend. When you buy through our links, we may earn a commission. Learn more

Buying guide · 10 min read · Updated October 2, 2026

6 Best RV Propane Tank Lock in 2026: A Practical RV Guide

Six RV propane tank locks compared by thread size, from 3/8-16 and 1/2-13 dual tank plates to a dual-thread Camco lock and a keyed-alike LP lock.

Bowen HigginsBy Bowen HigginsRV Editor at RV Gear Lab6 products comparedSpec-sheet researched

At a glance

Our top picks

At a glance · 6 picks

Two propane cylinders mounted on an RV tongue or A-frame are held down by a threaded post and a wing nut, and a wing nut turns by hand. A thief can unscrew it in seconds and walk off with a pair of tanks worth far more than the nut that held them. A propane tank lock replaces that wing nut with a plate that takes a padlock, so the tanks cannot be released without the key or code. Propane cylinders are an easy target because they are valuable and quick to unscrew.

Thread size is the one detail that decides whether the lock fits. Tank hold-downs use a threaded post, most commonly 1/2-13 or 3/8-16, and a plate cut for one thread will not engage the other. Buying by looks and not by thread size is the most common mistake with these locks. Check the post with a caliper or a spare nut before shopping.

We compared the six by the thread size each states, whether a padlock is included, the metal and finish and how the lock plate is built. The list starts with the lock that covers both threads and then groups the single-thread plates, ending with a keyed-alike LP lock that works differently.

RV Gear Lab field notes

The Rig Fit Check

Start with the job
Camco Double Propane Tank Steel Combination Locking Device for Theft Prevention Compatible with Conventional a leads this shortlist for Owners unsure of thread size or with several rigs. Use that fit as a reference point, then compare the alternatives against your own space and workload.
Specs that separate the picks
The first details to compare are Fits 0.5 and 0.38 inch posts, 1/2-13 threaded shaft, 3/8-16 threaded shaft. Confirm the exact model and included components before ordering.
Trade-off to plan for
Combination padlocks can be forgotten

Before you buy

What Matters Before You Choose an RV Propane Tank Lock

Key buying criteria so you get the right fit the first time.

  1. 01

    Thread size: 3/8-16 versus 1/2-13

    A hold-down post is threaded either 3/8-16 or 1/2-13, which means 3/8 inch or 1/2 inch diameter with a set number of threads per inch. A plate cut for one will not engage the other, so the lock cannot clamp the tanks. The PACEWALKER 3/8-16 states plainly that it does not fit 1/2-13. Measure the post diameter with a caliper or compare a spare nut, and match it to the listing. A hardware store thread gauge settles the question in a minute.

  2. 02

    Padlock type and key control

    A keyed padlock needs a key that can be lost, a combination or password padlock needs a code that can be forgotten, and a kit without a padlock lets you use your own. The Camco includes a combination padlock and the RVPNR a password disc padlock. A 304 stainless steel padlock resists rust better than plain steel. Choose the style you will remember and carry. If you choose a combination, write the code somewhere safe that is not on the rig.

  3. 03

    Plate material and welds

    Aluminum alloy will not rust, while zinc-plated steel is stronger but can corrode if the plating wears. A solid welded steel plate resists being pried off. The scottchen PRO lists solid welds and thick steel. Check the material on the listing and inspect the finish yearly. A light film of oil on the threads keeps the wing nut plate turning in wet weather.

  4. 04

    Locking holes and reinforcement

    Several holes let you lock the plate in different positions and fit different tank sizes. A four-footed plate sits flat over two tank collars and resists being bent. The PACEWALKER and RVPNR plates list six holes and four feet. Look at the photos to see how the plate sits on the tanks. Photograph your tank arrangement from above and compare it with the listing images.

  5. 05

    Layout compatibility

    Conventional side-by-side mounts and Airstream style configurations hold the tanks differently. A plate designed for one may not seat on the other. The Camco and RVPNR list both layouts. Check how your tanks are arranged before ordering. If your tanks sit in a framework, measure the clearance above the collar before ordering.

  6. 06

    Keyed-alike and fleet use

    A keyed-alike lock opens with the same key as other locks in the set, which is handy on a rig with several storage locks. It also means one lost key opens everything. The Part Synergy is a keyed-alike LP lock, a different style from the wing nut plates. Decide whether one key or many keys suits you. Think about whether one key for every lock is a convenience or a weakness.

Our standards

Why You Can Trust RV Gear Lab

At RV Gear Lab, we compare products based on rig fit and power or hookup compatibility, verified specifications, usability, setup requirements, weight, durability, and real-world trade-offs. We do not rank products purely on marketing claims or commission rates.

We have not personally tested every product listed. Where hands-on testing is not available, recommendations are based on verified manufacturer specifications, product documentation, use-case fit, and comparative research.

How we review RV gear →

Detailed reviews

The 6 best rv propane tank lock, explained

01
Best for: Owners unsure of thread size or with several rigs

Our take

A combination lock means no key to lose in a rig that already has a drawer full of them.

Why it made the shortlist

It fits both 0.5 inch and 0.38 inch threaded posts and works with traditional and Airstream configurations. Dual-post compatibility matters if you tow different trailers behind the same truck.

Compared with the single-thread plates, it includes a 0.5 inch top plate and a 0.38 inch top plate along with a lock plate and a padlock, so one kit covers either post size. Keyless access comes from a number combination lock, and the zinc-plated steel is built for lasting use.

Choose it when you are unsure of your thread size or you own more than one rig with different posts. Because it ships with both top plates, a single purchase also covers a replacement post later.

What works

  • Two top plates cover both thread sizes
  • Combination lock means no key to lose
  • Works with conventional and Airstream layouts
  • Zinc-plated steel resists rust

Watch out for

  • Combination padlocks can be forgotten
  • Plates must be matched to the post
02
Best for: 1/2-13 posts in wet or coastal climates

Our take

It is a complete kit with the padlock included, so there is nothing else to buy.

Why it made the shortlist

The PACEWALKER 1/2-13 is a dual propane tank locking device for 1/2-13 threaded shafts, compatible with most propane tank holders. The lock plate and wing nut plate are high quality aluminum alloy, and a 304 stainless steel padlock is included.

Compared with the RVPNR, it uses aluminum alloy plates that do not rust, and the lock plate has four feet for reinforcement. Six locking holes mean one or two holes can lock a pair of tanks securely.

Choose it when your post is 1/2-13 and you want rust-free plates. The four-footed base keeps the plate from rocking against the tank collars while you tow.

What works

  • Aluminum alloy plates will not rust
  • 304 stainless steel padlock included
  • Six holes allow flexible lock positions
  • Four-footed plate adds reinforcement

Watch out for

  • Fits only 1/2-13 posts
  • Aluminum is softer than steel
  • Padlock keys must be kept safe
03
Best for: Rigs with the smaller 3/8-16 post

Our take

Choose it when the post on your rig measures 3/8 inch.

Why it made the shortlist

The PACEWALKER 3/8-16 is the same dual propane tank lock built for 3/8-16 threaded posts. The listing states clearly that it will not fit 1/2-13 threads and asks you to check dimensions carefully.

The four-footed plate and six locking holes give a reinforced hold on a pair of tanks.

What works

  • Made for 3/8-16 posts that other plates will not fit
  • 304 stainless steel padlock included
  • Aluminum alloy plates resist rust
  • Six locking holes with a reinforced base

Watch out for

  • Will not fit 1/2-13 posts
  • Thread size must be verified first
  • Aluminum is softer than steel
The catch
It is the right choice for the smaller 3/8-16 post found on some trailers.
04
Best for: 1/2-13 posts and owners who dislike keys

Our take

The password padlock suits owners who dislike carrying a small key.

Why it made the shortlist

The RVPNR is a dual propane tank locking device for 1/2-13 threads, compatible with conventional and Airstream tank layouts. The plate is zinc-plated steel, and the disc padlock is 304 stainless steel with a password. The password padlock avoids the problem of a key falling off a ring in a storage compartment.

Compared with the PACEWALKER, it uses a steel plate and a password disc padlock, so there is no key at all. The lock plate has four feet for reinforcement and six locking holes, and the kit includes the top wing nut plate and a manual.

Choose it when you have a 1/2-13 post and want a keyless lock on a steel plate. The manual helps a first-time installer place the plate correctly over both tanks.

What works

  • Password padlock removes the need for a key
  • Zinc-plated steel plate is stout
  • Works with conventional and Airstream layouts
  • Padlock and manual included

Watch out for

  • Fits only 1/2-13 threads
  • A forgotten password means a cut lock
  • Disc padlock needs care in grit
05
Best for: Owners who already have a padlock to use

Our take

It is the lowest-cost way to add a locking plate to a 1/2-13 post.

Why it made the shortlist

The scottchen PRO is a zinc-plated steel lock plate with a wingnut plate for 1/2-13 threaded posts, with four reinforced locking holes. The listing says a basic wingnut has no lock holes, so this plate is an upgrade that accepts a padlock.

Compared with the PACEWALKER kits, no padlock is included, which lets you choose your own lock and keep keys alike across your rig. The steel is thick and solid welded, and installation takes about a minute with no tools.

Choose it when you already own a good padlock. Pairing it with a padlock you already trust keeps the rig on a single key.

What works

  • Lets you choose your own padlock
  • Thick zinc-plated steel with solid welds
  • One minute installation with no tools
  • Four reinforced locking holes

Watch out for

  • Padlock is not included
  • Fits only 1/2-13 posts
  • Padlock hole size limits which locks fit
06
Best for: Fleets and multi-unit rigs wanting one key

Our take

It suits fleets or multi-unit setups where one key should open every lock.

Why it made the shortlist

The Part Synergy is a key-type LP lock used to lock an LP tank when it is mounted to an RV, with a bracket to mount an LP regulator. It is described as easy to install in standard LP lock locations and includes the lock unit and matching keys.

It is a different style from the wing nut plates, since it locks the tank at the LP lock location and is keyed alike so a single key fits several units. The listing says it prevents unauthorized access to the LP gas system.

Choose it when your tanks use a standard LP lock location and you want a keyed-alike lock. Standard LP lock locations make it a straightforward swap for owners who already know their mount.

What works

  • Keyed alike so one key opens several locks
  • Includes lock unit and matching keys
  • Bracket mounts an LP regulator
  • Easy install in standard LP locations

Watch out for

  • Not a wing nut plate replacement
  • Fit depends on your LP lock location
  • Listing gives few dimensions

Methodology

How We Built This Shortlist

Each pick was assessed across 5 criteria weighted for real-world use.

01

Thread size match

We sorted locks by 1/2-13, 3/8-16 or dual-thread fit, because the plate must match the threaded post. A plate that cannot thread onto the post was ranked out regardless of its other features.

02

Padlock included or not

We noted which kits include a padlock and which accept your own, since that changes the cost and the key situation. Kits that include a padlock scored higher for owners who do not already own one.

03

Plate material

We compared aluminum alloy, zinc-plated steel and stainless padlocks for corrosion and strength.

04

Layout compatibility

We looked for conventional and Airstream layout notes, which affect how the plate sits over two tanks. Listings that mention conventional and Airstream layouts were noted for flexibility.

05

Install effort

We noted tool-free installs and included hardware.

Decision guide

Match an RV Propane Tank Lock to Your RV

By Thread Size

Your situationRecommended pickWhy
Unsure of thread, or two rigsCamco Double LockTwo top plates fit both 0.5 inch and 0.38 inch posts.
1/2-13 post, wanting aluminum platesPACEWALKER 1/2-13Aluminum alloy plates with a 304 padlock and six locking holes.
3/8-16 postPACEWALKER 3/8-16The 3/8-16 version of the same reinforced lock plate.
1/2-13 post, wanting a password padlockRVPNR Steel LockZinc-plated steel with a password disc padlock.
1/2-13 post, bringing your own padlockscottchen PRO Lock PlateA thick welded plate with four locking holes and no padlock.

By Budget

BudgetRecommended pick
Entry of this shortlistscottchen PRO Lock Plate or RVPNR Steel Lock
Mid of this shortlistPACEWALKER 1/2-13 or PACEWALKER 3/8-16
Top of this shortlistPart Synergy LP Lock or Camco Double Lock

Key Padlock vs Combination Padlock

Combination or password

No key to lose, though a forgotten code means cutting the lock. Camco Double Lock and RVPNR Steel Lock use codes.

Keyed or your own padlock

A key is simple, and your own padlock lets you key alike. PACEWALKER 1/2-13, PACEWALKER 3/8-16 and scottchen PRO Lock Plate work this way.

If you are unsure of thread size, the Camco Double Lock covers both posts in one kit.

By Plate Material

PriorityRecommended pick
Rust-free aluminumPACEWALKER 1/2-13
Thick welded steelscottchen PRO Lock Plate
Zinc-plated steel with a password lockRVPNR Steel Lock
Keyed-alike LP lockPart Synergy LP Lock

For Dual Tanks on an A-Frame Specifically

Look for

A thread size that matches the post, a plate that sits on both tank collars and a padlock you will remember

In this comparison

The Camco Double Lock and PACEWALKER kits are built for dual tank layouts, with the Camco covering both thread sizes.

When to Spend More

Spend more if

Spend more if you want one kit to fit two thread sizes and a built-in combination lock, where the Camco Double Lock pays off.

Save if

Save if you know your thread size and own a padlock, where the scottchen PRO Lock Plate gives a locking plate at a low cost.

FAQ

Before You Bring One Home

How do I tell if my post is 3/8-16 or 1/2-13?

Measure the post diameter with a caliper, or compare a spare nut to a hardware store gauge. 3/8 inch is about 9.5 mm and 1/2 inch about 12.7 mm. The PACEWALKER 3/8-16 will not fit 1/2-13, so confirm before you order. If you have no caliper, a phone photo of the post next to a ruler works for a rough check.

Will a lock stop a determined thief?

No. A stainless padlock can be cut with bolt cutters, but a locked plate stops a quick unscrewing of the wing nut. The aim is to make the tanks slower to take than the next rig. Pair it with a tracker or camera. A lock on the tanks is most useful on a trailer that sits in a storage yard.

Is a combination padlock worth it over a key?

A combination lock like the Camco Double Lock removes the key to lose, but you must remember the code. A key lock like the PACEWALKER 1/2-13 is simple and quick. Choose what you will actually use. Write the combination on a card and keep it with your registration paperwork.

How do I install a tank lock?

Remove the wing nut, set the lock plate over the post and screw on the top plate, then close the padlock. The scottchen PRO Lock Plate takes about a minute with no tools. Check the tanks are tight before you drive. Wipe the threads clean and apply a drop of oil if the plate feels stiff.

Do I need to remove it to swap a tank?

Yes. Unlock the padlock and remove the plate to lift the tanks. Keep the key or code handy at refill time. Unlock the padlock, lift the plate off the post and swing the tanks out of the frame. Keep the key or code in a place you will remember at refill time, and relock the plate before you leave.

What is the Part Synergy LP lock for?

It is a keyed-alike lock for an LP tank at a standard LP lock location, with a bracket for an LP regulator. It is not a wing nut plate replacement. Check your tank mount before buying.

Bottom line

The short version

Browse more rv propane tank lock on Amazon →
Bowen Higgins, RV Editor at RV Gear Lab

About the author

Bowen Higgins

RV Editor at RV Gear Lab

Bowen covers RV power, water systems, towing and leveling, upkeep and interior comfort, with a focus on matching gear to the rig, the hookups and the way you actually travel.

More from Bowen →Editorial standards

Keep reading

Related guides