We research everything we recommend. When you buy through our links, we may earn a commission. Learn more

Buying guide · 10 min read · Updated October 2, 2026

5 Best Trailer Spare Tire Carrier in 2026: A Practical RV Guide

Six trailer spare tire carriers compared by mount style, from 4 inch bumper brackets to frame and side mounts, with bolt pattern and tire size fit.

Bowen HigginsBy Bowen HigginsRV Editor at RV Gear Lab5 products comparedSpec-sheet researched

At a glance

Our top picks

A spare tire only helps if it rides somewhere safe and stays put over thousands of miles. On a travel trailer that usually means a rear bumper bracket, and on a utility or boat trailer it means a bracket bolted to the frame or tongue. The mount you choose depends first on what structure you have to bolt to.

Fit is a three part question: the bumper or frame dimensions, the wheel's lug count and bolt pattern, and the tire diameter. A carrier that lines up with two of those and not the third rattles loose or will not seat the wheel at all. That is why this guide starts from the mounting point rather than from price.

We compared each carrier by the structure it attaches to, the bolt patterns and tire sizes stated, the construction material and the extras like locking hardware. The list runs from the tall aluminum bumper bracket down to the simple U-bolt side mount. Buyers on boat trailers should weigh corrosion more heavily, and travel trailer owners should weigh ground clearance.

RV Gear Lab field notes

The Rig Fit Check

Start with the job
Safoner RV Spare Tire Mount leads this shortlist for Travel trailers with a 4 inch square rear bumper. Use that fit as a reference point, then compare the alternatives against your own space and workload.
Specs that separate the picks
The first details to compare are Aluminum, weld-free, Nickel-plated steel, Alloy steel, powder coat. Confirm the exact model and included components before ordering.
Trade-off to plan for
Only for 4 inch square bumpers up to 4.4 inches tall

Before you buy

What Matters Before You Choose a Trailer Spare Tire Carrier

Key buying criteria so you get the right fit the first time.

  1. 01

    Mounting point and dimensions

    A spare tire carrier bolts to a bumper or a frame rail, and each has its own width and height limits. It matters because a bracket that is slightly too wide will not clamp, and one that is too narrow will rattle. Measure your bumper or frame before ordering and compare against the listing, such as the Safoner limit of 4.4 inches tall and 4.3 inches wide. Then check that the hardware reaches around your structure with room to tighten. A bracket that sits flush and tight on the bumper is far less likely to shift on washboard roads.

  2. 02

    Lug count and bolt pattern

    The lug count and bolt circle on your spare must match the studs on the carrier. Common trailer patterns are 4 on 4, 5 on 4.5, 5 on 4.75 and 5 on 5, and many carriers cover only some. If the pattern is wrong, the wheel cannot be secured. Count the lug nuts on your spare, measure the bolt circle, and match them to the listing.

  3. 03

    Tire and wheel diameter

    Each carrier is designed around a range of wheel sizes, from 15 inch utility spares up to 16 inch RV spares. A carrier made for smaller wheels can bend or leave the tire hanging. Check the maximum diameter on the listing, and remember to measure overall tire diameter, not just the rim. For example, the Outus Bumper Carrier lists 15 and 16 inch wheels, while the lifgarfe U-Bolt Mount tops out at 15 inches. Tall spares also need more clearance behind the bumper, so compare the stated depth on the listing with the gap on your trailer.

  4. 04

    Material and corrosion resistance

    Aluminum, nickel-plated steel, powder-coated steel and zinc-coated steel each resist rust differently. Welds are a common failure point on steel mounts, which is why the Safoner uses weld-free formed parts. Road salt and boat trailers expose the bracket to constant moisture. Look at the finish named on the listing and inspect the bracket each season. Even a coated bracket can chip where it meets the bumper, so a dab of touch-up paint at the contact points extends its life.

  5. 05

    Ground clearance and mounting height

    A spare that hangs too low scrapes on driveways and dips. A taller post, like the 22 inch post on the Safoner, lifts the wheel higher. Higher mounting also moves weight farther from the axle, so the bracket needs to be strong enough. Check the post height or mounting angle on the listing.

  6. 06

    Locking and anti-vibration hardware

    Road vibration loosens nuts, and an unlocked spare tire can be stolen. A lock washer and dual nuts resist loosening, and a locking nut or cable deters theft. The WELLUCK includes a locking nut and rope, and the Safoner uses a lock washer with dual nuts. Check the hardware list and recheck tightness before each trip.

Our standards

Why You Can Trust RV Gear Lab

At RV Gear Lab, we compare products based on rig fit and power or hookup compatibility, verified specifications, usability, setup requirements, weight, durability, and real-world trade-offs. We do not rank products purely on marketing claims or commission rates.

We have not personally tested every product listed. Where hands-on testing is not available, recommendations are based on verified manufacturer specifications, product documentation, use-case fit, and comparative research.

How we review RV gear →

Detailed reviews

The 5 best trailer spare tire carrier, explained

01

Best Overall · 1 of 5

Safoner RV Spare Tire Mount

Safoner RV Spare Tire Mount
  • Aluminum, weld-free
  • 22 inch post, triple lock
  • 4, 5, 6 lug, 4.0 to 5.5 inch
Check price on Amazon for Safoner RV Spare Tire Mount (opens in a new tab)
Best for: Travel trailers with a 4 inch square rear bumper

Our take

It handles 4, 5 and 6 lug wheels with 4.0 to 5.5 inch bolt patterns, so most RV spares are covered.

Why it made the shortlist

The Safoner is an aluminum carrier for 4 inch square rear bumpers, built from three one-piece formed components with no welded joints. A taller 22 inch vertical post lifts the spare higher above the bumper, which helps avoid scraping in driveways and over dips.

Compared with the Outus steel bracket, it adds a triple-lock mounting design with an anti-loosening lock washer and dual nuts that resists vibration. Lower mounting slots allow minor vertical adjustment for a tight fit on bumpers up to 4.4 inches tall.

It is the best match for a travel trailer with a standard 4 inch square bumper where ground clearance matters. A tall post also helps on rigs that ride low behind the axle, where a bumper-hung wheel is the lowest point.

What works

  • Weld-free aluminum parts avoid corrosion at the joints
  • Tall 22 inch post keeps the spare above scraping height
  • Triple lock hardware resists road vibration
  • Fits 4, 5 and 6 lug wheels

Watch out for

  • Only for 4 inch square bumpers up to 4.4 inches tall
  • Bumper width is limited to 4.3 inches
02

Best Frame Mount · 2 of 5

3001.0064 Spare Tire Mount for Trailer

3001.0064 Spare Tire Mount for Trailer
  • Nickel-plated steel
  • Direct-to-frame, no drilling
  • 4.5, 4.75, 5 inch patterns
Check price on Amazon for 3001.0064 Spare Tire Mount for Trailer (opens in a new tab)
Best for: Boat and utility trailers with frame-only mounting

Our take

Nickel plating adds rust and corrosion resistance, helpful on boat trailers that live near salt water.

Why it made the shortlist

The Sunluway is a heavy-duty nickel-plated steel high-mount bracket for trailer frames, holding 4, 5 and 6 lug wheels on 4.5, 4.75 and 5 inch bolt patterns. The direct-to-frame design needs no drilling or cutting, just a couple of wrenches and the included hardware.

Unlike the Safoner Aluminum Bumper, it bolts to the frame rather than a bumper, which makes it the choice for boat and utility trailers that have no rear bumper. The angled, high-mounted shape keeps the tire close to the frame and leaves more space for towed cargo.

The simple shape is easy to inspect and re-torque during seasonal maintenance.

What works

  • Direct-to-frame install with no drilling or cutting
  • Nickel-plated steel resists rust and corrosion
  • Fits 4.5, 4.75 and 5 inch bolt patterns
  • Angled design leaves cargo space free

Watch out for

  • Frame size must be checked against the listing
  • Not designed for bumper mounting
  • Hardware set is basic
03
Best for: Moving a 15 or 16 inch spare onto a 4 inch bumper

Our take

It is a good choice when you want to move a 15 or 16 inch spare out of the cargo area and onto the bumper without spending much.

Why it made the shortlist

The Outus is a powder-coated alloy steel carrier for 4 inch square bumpers, with an adjustable width range of 1.5 to 4 inches and a 3 inch depth. It supports 15 and 16 inch wheels, which covers the most common RV spare sizes.

Against the Safoner Aluminum Bumper, it uses steel with a powder-coat finish for rust resistance and installs with basic hand tools. The adjustable width lets it fit a range of trailer frames beyond a single bumper design.

Pick it for campers and utility trailers that need a simple bolt-on.

What works

  • Adjustable width suits several bumper and frame sizes
  • Powder-coated alloy steel resists rust
  • Installs with basic hand tools
  • Holds 15 and 16 inch spares

Watch out for

  • Steel is heavier than the aluminum option
  • Designed around a 4 inch bumper
  • Fewer lock features than other picks
04
WELLUCK Trailer Spare Tire Mount Carrier
  • 5 mm steel, 150 lb rating
  • Locking nut and rope
  • 4, 5, 6 lug, five patterns
Check price on Amazon for WELLUCK Trailer Spare Tire Mount Carrier (opens in a new tab)
Best for: Trailers parked in places where theft is a concern

Our take

It suits utility, boat and camper trailers in places where a spare tire is a theft target.

Why it made the shortlist

The WELLUCK is crafted from 5 mm thick steel and supports up to 150 lbs. It fits 4, 5 and 6 lug wheels on 4, 4.5, 4.75, 5 and 5.5 inch bolt patterns, covering a wider range of patterns than most mounts.

Compared with the Sunluway Frame Mount, it adds a locking nut and theft-resistant rope, which protects the wheel while the trailer is parked. The welded triangular structure adds stability and durability.

Choose it when security matters as much as fit. The wide range of supported bolt patterns also makes it useful if you swap wheels between trailers.

What works

  • 5 mm steel supports up to 150 lbs
  • Locking nut and rope add theft protection
  • Welded triangular structure adds stability
  • Five bolt patterns supported

Watch out for

  • Rope lock is a deterrent rather than a heavy lock
  • Frame size needs checking
05
Best for: Lightweight trailers needing a quick side mount

Our take

It is a practical pick for a lightweight utility trailer where a quick, low-profile mount is all you need.

Why it made the shortlist

The lifgarfe is a U-bolt bracket that clamps to trailer frames up to 2 or 3 inches wide and holds spares up to 15 inches on 4 on 4 or 5 on 4.5 inch patterns. It is made of zinc-coated heavy-duty steel with a 3 inch thread length.

Against the Outus Bumper Carrier, it is a much simpler side mount, installed by tightening a nut. The package includes the U-bolt, two nuts and gaskets.

What works

  • Installs by tightening a nut
  • Zinc coating helps prevent rust
  • Fits most trailer studs and nut sizes
  • Includes U-bolt, nuts and gaskets

Watch out for

  • Only for 4 or 5 lug wheels up to 15 inches
  • Lightest duty mount here
  • No locking feature
The catch
Choose it for small trailers with 15 inch or smaller spares.

Methodology

How We Built This Shortlist

Each pick was assessed across 5 criteria weighted for real-world use.

01

Mounting structure

We sorted carriers by whether they attach to a 4 inch bumper, a frame or a tongue. That decides whether a pick can physically fit your trailer. A carrier that fits a stated structure earned a higher place than a universal claim.

02

Bolt pattern and lug count

We compared lug counts and bolt patterns stated on each listing. A carrier with the wrong pattern cannot hold the wheel.

03

Tire diameter coverage

We noted the maximum wheel size each carrier handles, from 15 inch utility spares to 16 inch RV spares.

04

Material and finish

We compared aluminum, nickel-plated steel, powder coat and zinc, since corrosion is the main long term issue.

05

Security and install effort

We weighed lock hardware and tool-free install against complexity.

Decision guide

Match a Trailer Spare Tire Carrier to Your RV

By Mounting Point

Your situationRecommended pickWhy
4 inch square rear bumper on a travel trailerSafoner Aluminum BumperA 22 inch post and triple lock hardware suit a standard 4 inch bumper.
Adjustable bumper or frame fit with a 15 or 16 inch spareOutus Bumper CarrierA 1.5 to 4 inch width range holds 15 and 16 inch wheels.
Frame only, such as boat or utility trailerSunluway Frame MountDirect-to-frame install with nickel-plated steel needs no drilling.
Quick side mount on a narrow framelifgarfe U-Bolt MountA U-bolt clamps to frames up to 2 or 3 inches wide.

By Budget

BudgetRecommended pick
Entry of this shortlistlifgarfe U-Bolt Mount or WELLUCK Locking Mount
Mid of this shortlistOutus Bumper Carrier or Sunluway Frame Mount
Top of this shortlistSafoner Aluminum Bumper

Aluminum vs Steel Brackets

Aluminum

Weld-free formed aluminum avoids corrosion at joints and resists rust. The Safoner Aluminum Bumper is the aluminum pick here.

Steel

Steel with powder coat, nickel or zinc plating is stronger per dollar. The Sunluway Frame Mount, Outus Bumper Carrier, WELLUCK Locking Mount and lifgarfe U-Bolt Mount use steel.

For a travel trailer that rides in rain and road salt, the Safoner Aluminum Bumper is the longest lasting option.

By Spare Tire Size

Spare sizeRecommended pick
16 inch RV spareSafoner Aluminum Bumper
15 inch utility spareOutus Bumper Carrier
15 inch or smaller, side mountlifgarfe U-Bolt Mount

For a Travel Trailer Specifically

Look for

A 4 inch bumper fit, a bolt pattern match for your wheel, and a post tall enough to clear driveways

In this comparison

The Safoner Aluminum Bumper is the closest match with its 22 inch post and 4.4 inch bumper tolerance, and the Outus Bumper Carrier is a simpler steel alternative.

When to Spend More

Spend more if

Spend more if you tow a travel trailer on rough roads, where the Safoner Aluminum Bumper gives clearance and lock hardware, or the WELLUCK Locking Mount if theft is a worry.

Save if

Save if your trailer is a small utility unit, where the lifgarfe U-Bolt Mount does the job at a lower cost.

FAQ

Before You Bring One Home

How do I know if my bumper is a 4 inch square?

Measure the height and width of the bumper tube with a tape. The Safoner Aluminum Bumper fits bumpers up to 4.4 inches tall and 4.3 inches wide, while the Outus Bumper Carrier is designed for 4 inch square bumpers. Round or odd shapes may not fit either. If your bumper is a different shape, a frame mount such as the Sunluway Frame Mount may be the better route.

What bolt pattern should I look for?

Count the lug nuts on your spare wheel, then measure the bolt circle. The Sunluway Frame Mount covers 4.5, 4.75 and 5 inch patterns, while the lifgarfe U-Bolt Mount only handles 4 on 4 and 5 on 4.5. Match the pattern before ordering.

Is aluminum worth it over steel?

Aluminum avoids rust and welds, so it lasts longer in rain and salt. The Safoner Aluminum Bumper is also taller, giving more clearance. Steel mounts like the Outus Bumper Carrier are heavier but a cheaper option.

How do I install a bumper carrier?

Clamp the bracket around the bumper, set the vertical position in the slots, and tighten the nuts with a wrench. On the Safoner Aluminum Bumper, tighten the dual nuts against the lock washer. Mount the spare, and recheck tightness after the first trip. A dab of thread locker on the nuts is a cheap extra layer against vibration. Re-torque after the first 50 miles, since new hardware settles.

How do I stop my spare from being stolen?

Use a mount with a locking nut or cable, such as the WELLUCK Locking Mount. Park with the spare facing the wall or a fence when possible. Remember that a rope is a deterrent and not a full lock.

Can I mount a 16 inch RV spare on a small utility carrier?

Not on the lifgarfe U-Bolt Mount, which tops out at 15 inches and only handles 4 or 5 lug patterns. For 16 inch spares, use the Safoner Aluminum Bumper or Outus Bumper Carrier, both of which list 16 inch capacity or 5.5 inch bolt patterns. Confirm the wheel size before ordering.

Bottom line

The short version

Browse more trailer spare tire carrier on Amazon →
Bowen Higgins, RV Editor at RV Gear Lab

About the author

Bowen Higgins

RV Editor at RV Gear Lab

Bowen covers RV power, water systems, towing and leveling, upkeep and interior comfort, with a focus on matching gear to the rig, the hookups and the way you actually travel.

More from Bowen →Editorial standards

Keep reading

Related guides