We research everything we recommend. When you buy through our links, we may earn a commission. Learn more

Buying guide · 10 min read · Updated October 2, 2026

6 Best Weight Distribution Hitch With Integrated Sway Control in 2026: A Practical RV Guide

Six weight distribution hitches with built-in sway control, from trailer-mounted CURT TruTrack to Fastway e2 and Husky, with shank and tongue weight notes.

Bowen HigginsBy Bowen HigginsRV Editor at RV Gear Lab6 products comparedSpec-sheet researched

At a glance

Our top picks

Integrated sway control means the sway resistance is part of the weight distribution hardware rather than a separate friction bar bolted on later. This shortlist covers six such hitches, including two trailer-mounted CURT TruTrack models, two Fastway e2 kits and two Husky kits, with ratings quoted from each listing.

Tongue weight is the first sizing number, usually 10 to 15 percent of the loaded trailer weight, followed by the stated gross trailer weight. Two e2 kits are sold without a shank, which must be bought separately.

RV Gear Lab field notes

The Rig Fit Check

Start with the job
Fastway e2 2-Point Sway Control Trunnion Hitch leads this shortlist for Complete e2 kit. Use that fit as a reference point, then compare the alternatives against your own space and workload.
Specs that separate the picks
The first details to compare are 10,000 lb trailer rating, 12,000 lb GTW, 800 to 1,200 lb TW. Confirm the exact model and included components before ordering.
Trade-off to plan for
Hookup uses lift brackets and takes practice

Before you buy

What Matters Before You Choose a Weight Distribution Hitch With Integrated Sway Control

Key buying criteria so you get the right fit the first time.

  1. 01

    Integrated versus bolted-on

    An integrated system builds sway resistance into the head and brackets, so there is no separate friction bar to install or remove. Fastway e2 states that it can stay attached when backing. A bolt-on bar is cheaper but must usually be loosened for sharp turns.

  2. 02

    Stated tongue weight rating

    Fastway e2 92-00-1065 states 1,000 lb tongue weight and Husky 30849 states 800 to 1,200 lb, while CURT TruTrack listings state none. A rating at or somewhat above your measured tongue weight keeps the bars working properly. Ask the seller if the listing is silent.

  3. 03

    Shank included or not (with integrated sway control)

    Fastway e2 92-00-1033 says it does not include a shank, so a separate one must match your receiver and drop. A wrong drop leaves the trailer nose-up or nose-down. Check the title for the word without.

  4. 04

    Trailer-mounted convenience

    CURT 17510 and 17520 keep the spring bars mounted on the trailer, so hookup is quicker. That convenience comes at a high price. Make sure the trailer frame can take the mounting.

  5. 05

    Round bar versus trunnion

    Husky 30849 and Husky 31986 are round bar designs, while the Fastway e2 and CURT TruTrack models are trunnion designs. Round bar kits tend to cost less but sit lower. Choose by ground clearance and price.

Our standards

Why You Can Trust RV Gear Lab

At RV Gear Lab, we compare products based on rig fit and power or hookup compatibility, verified specifications, usability, setup requirements, weight, durability, and real-world trade-offs. We do not rank products purely on marketing claims or commission rates.

We have not personally tested every product listed. Where hands-on testing is not available, recommendations are based on verified manufacturer specifications, product documentation, use-case fit, and comparative research.

How we review RV gear →

Detailed reviews

The 6 best weight distribution hitch with integrated sway control, explained

01
Fastway e2 2-Point Sway Control Trunnion Hitch
  • 10,000 lb trailer rating
  • 1,000 lb tongue weight
  • 2-point sway control trunnion
Check price on Amazon for Fastway e2 2-Point Sway Control Trunnion Hitch (opens in a new tab)
Best for: Complete e2 kit

Our take

Best for a trailer up to 10,000 lb with a tongue weight near 1,000 lb.

Why it made the shortlist

The Fastway e2 92-00-1065 has built-in two-point sway control, a 10,000 lb trailer rating and a 1,000 lb tongue weight rating. The Fastway e2 92-00-1065 is a trunnion-style weight distribution hitch with built-in two-point sway control, rated 10,000 lb trailer weight and 1,000 lb tongue weight in its title.

It states both ratings, unlike the CURT TruTrack listings, and it stays attached when backing. It is the complete-kit version, unlike the 92-00-1033.

What works

  • Built-in sway control with no add-on bar
  • Stays attached when backing or turning

Watch out for

  • Hookup uses lift brackets and takes practice
02

Best Shank-Less Value · 2 of 6

Fastway e2 2-Point Sway Control Trunnion Hitch

Fastway e2 2-Point Sway Control Trunnion Hitch
  • 10,000 lb trailer rating
  • 1,000 lb tongue weight
  • Shank not included
Check price on Amazon for Fastway e2 2-Point Sway Control Trunnion Hitch (opens in a new tab)
Best for: E2 without shank

Our take

Best for an owner who already has a compatible shank.

Why it made the shortlist

The Fastway e2 92-00-1033 is a trunnion-style weight distribution kit with built-in two-point sway control, rated 10,000 lb trailer weight and 1,000 lb tongue weight.

It costs less than Fastway e2 92-00-1065 and requires a compatible shank bought separately, which can erase the savings.

Buy a compatible shank at the same time, since it will not work without one.

What works

  • Built-in sway control with no add-on bar
  • Stays attached when backing or turning
  • Trunnion-style bars rated 10,000 lb
  • Cheaper than the shank-included e2 kits

Watch out for

  • Title says the kit does not include a shank
  • Needs a compatible shank bought separately
03
Husky Weight Distribution Hitch 30849
  • 12,000 lb GTW, 800 to 1,200 lb TW
  • Round bar, 10 inch shank
  • Dual sway control platform
Check price on Amazon for Husky Weight Distribution Hitch 30849 (opens in a new tab)
Best for: Round bar with sway

Our take

Best for a 12,000 lb trailer with a tongue weight between 800 and 1,200 lb.

Why it made the shortlist

Husky's 30849 is a round bar hitch rated 800 to 1,200 lb tongue weight and 12,000 lb gross trailer weight with a dual sway control platform. Husky's 30849 is a round bar weight distribution hitch rated 800 to 1,200 lb tongue weight and 12,000 lb gross trailer weight, with a 10 inch shank and 2-5/16 inch ball.

It states a tongue weight range that the Fastway kits do not and includes a 10 inch shank and ball. Its shank has a small drop.

What works

  • Stated range of 800 to 1,200 lb tongue weight
  • Includes a 10 inch shank and 2-5/16 inch ball
  • Dual sway control platform
  • 8 inch total height adjustment

Watch out for

  • Drop is only 2-3/8 inch with 5-5/8 inch rise
  • Bolt-together shank assembly
04
Best for: 600 lb round bar

Our take

Best for a trailer with a tongue weight up to 600 lb.

Why it made the shortlist

Husky's 31986 is a 600 lb round bar package with a dual friction sway control brake pad system. Husky's 31986 is a round bar weight distribution package with a 600 lb tongue weight capacity, a dual friction sway control brake pad system and 8 inches of total height adjustment. It includes a 2-5/16 inch ball and a 10 inch shank.

It is lighter-duty than Husky 30849 and has a modest drop and rise. It costs less than the CURT TruTrack kits.

What works

  • Dual friction sway control brake pads
  • 8 inch total height adjustment
  • 2-5/16 inch ball included
  • 600 lb tongue weight capacity

Watch out for

  • Drop is only 2-3/8 inch with 5-5/8 inch rise
  • 600 lb class limits heavier trailers
05
Best for: Spring bars stay on

Our take

Choose CURT 17510 TruTrack 2P Trailer-Mounted Weight Distribution Hitch for locks into place with a single pin.

Why it made the shortlist

CURT's 17510 TruTrack 2P is trailer-mounted with a quick-connect single-pin coupling and a 10,000 lb rating. CURT's 17510 is a trailer-mounted TruTrack 2P weight distribution hitch rated at 10,000 lb in its title.

What works

  • Locks into place with a single pin
  • Spring bars stay on the trailer between trips
  • Heavy-duty adjustable support brackets
  • Spreads load across all axles of the combination

Watch out for

  • Costs far more than conventional kits
The catch
The listing does not state a tongue weight rating, so confirm it against your loaded tongue weight before ordering.
06
CURT 17520 TruTrack 4P Trailer-Mounted Weight Distribution Hitch
  • 10,000 lb TruTrack 4P trailer-mounted
  • Quick-connect coupling
  • Four-point sway control
Check price on Amazon for CURT 17520 TruTrack 4P Trailer-Mounted Weight Distribution Hitch (opens in a new tab)
Best for: Four-point trailer-mounted

Our take

Best for the maximum sway resistance in a trailer-mounted design.

Why it made the shortlist

CURT's 17520 TruTrack 4P is the four-point trailer-mounted version rated 10,000 lb. CURT's 17520 is a trailer-mounted TruTrack 4P weight distribution hitch rated 10,000 lb. Its quick-connect coupling locks with a single pin and the spring bars stay on the trailer.

What works

  • Locks into place with a single pin
  • Spring bars stay on the trailer between trips
  • Four-point TruTrack design
  • Rated 10,000 lb
The catch
It costs more than CURT 17510 and adds two more sway points.

Methodology

How We Built This Shortlist

Each pick was assessed across 5 criteria weighted for real-world use.

01

Integrated sway

Only hitches whose listings describe sway control as part of the system were included.

02

Stated ratings

Tongue weight and gross trailer weight figures were compared where given.

03

What is in the box

Shanks and balls were checked, since two e2 kits differ on that.

04

Hookup method

Trailer-mounted and conventional bars were compared.

05

Price

Premiums were weighed against stated features.

Decision guide

Match a Weight Distribution Hitch With Integrated Sway Control to Your RV

By Tongue Weight

Your situationRecommended pickWhy
Up to 600 lbHusky 31986600 lb round bar.
800 to 1,200 lbHusky 30849States 800 to 1,200 lb tongue weight.
Near 1,000 lb, complete kitFastway e2 92-00-10651,000 lb with shank included.
Near 1,000 lb, own a shankFastway e2 92-00-1033Same rating without a shank.
Frequent hookups, 10,000 lbCURT 17510Trailer-mounted bars.

By Budget

BudgetRecommended pick
$300 to $380Husky 31986 or Husky 30849
$380 to $540Fastway e2 92-00-1033 or Fastway e2 92-00-1065
$690 to $1070CURT 17510 or CURT 17520

Trailer-Mounted vs Conventional Bars

Trailer-mounted

Bars stay on the trailer, so hookup is a single pin. CURT 17510 and CURT 17520 work this way.

Conventional

Bars attach each trip but cost far less. Fastway e2 92-00-1065, Husky 30849 and Husky 31986 are conventional.

Choose Fastway e2 92-00-1065 for most owners and CURT 17510 only if frequent hookups justify the cost.

By Bar Style

StyleRecommended pick
Trunnion barsFastway e2 92-00-1065
Round barsHusky 30849
Lighter round barHusky 31986
Four-point trailer-mountedCURT 17520

For Frequent Hookups Specifically

Look for

Look for trailer-mounted bars and a single-pin coupling.

In this comparison

CURT 17510 and CURT 17520 both use a single-pin quick-connect coupling.

When to Spend More

Spend more if

Spend more for trailer-mounted convenience, where CURT 17510 beats the conventional kits.

Save if

Save with Husky 31986 for a light trailer.

FAQ

Before You Bring One Home

What does integrated sway control mean?

It means the sway resistance is part of the weight distribution hardware, not a separate bolt-on bar. That usually means fewer parts and no removal for backing.

Is the e2 without a shank a good deal for with integrated sway control?

Only if you already own a compatible shank. Otherwise the shank adds cost and a fit question about drop and rise.

Is trailer-mounted worth the price?

It saves time at each hookup but costs far more than conventional kits. It makes sense for frequent users.

How do I set up an integrated system?

Level the trailer, install the head and brackets, then tension the bars per the manual. Re-check after loading.

How do I maintain it for with integrated sway control?

Inspect the brackets, pins and bar contact points regularly. Follow the maker's lubrication guidance.

Bottom line

The short version

Browse more weight distribution hitch with integrated sway control on Amazon →
Bowen Higgins, RV Editor at RV Gear Lab

About the author

Bowen Higgins

RV Editor at RV Gear Lab

Bowen covers RV power, water systems, towing and leveling, upkeep and interior comfort, with a focus on matching gear to the rig, the hookups and the way you actually travel.

More from Bowen →Editorial standards

Keep reading

Related guides