We research everything we recommend. When you buy through our links, we may earn a commission. Learn more

Buying guide · 10 min read · Updated October 2, 2026

6 Best X Chocks in 2026: A Practical RV Guide

Six X-chock wheel stabilizers compared by the tire gap each one spans on tandem axle trailers, plus build material, tools included and anti-rock performance.

Bowen HigginsBy Bowen HigginsRV Editor at RV Gear Lab6 products comparedSpec-sheet researched

At a glance

Our top picks

A parked travel trailer rocks on its tires every time someone walks inside, and the rocking comes mostly from the rolling and flexing of the two tires on each tandem axle. An X-chock is a scissor-style spreader that goes between the tandem tires and expands until it pushes them apart, which locks both tires against the pavement and takes out most of the movement. It is the cheapest fix for a trailer that feels like a boat. Before you buy, walk around the trailer once and note whether the movement is fore-and-aft or side to side.

The key measurement is the gap between the two tires on your tandem axle. An X-chock only works within a fixed range of gaps, and it must be measured with the trailer parked on level ground. Most of the units here list a 3.5 to 12 inch range, while one lists 3 to 10 inches, so a rig with an unusual gap can rule a pick out. A tape measure at ground level beats a guess from memory every time.

We compared the six on the stated spacing range, the build material, the tools and accessories included, the grip design and the warranty. They come as sets of two, one for each side of the trailer, and they all work the same way, so details and fit decide the order.

RV Gear Lab field notes

The Rig Fit Check

Start with the job
Camper Wheel Chock Stabilizer 2 Sets leads this shortlist for Most tandem axle trailers with a typical gap. Use that fit as a reference point, then compare the alternatives against your own space and workload.
Specs that separate the picks
The first details to compare are Fits 3.5 to 12 inch tire gaps, Cast iron X-chock, 3.5 to 12 inches, Cast iron, fits 3.5 to 12 inches. Confirm the exact model and included components before ordering.
Trade-off to plan for
No storage bag mentioned

Before you buy

What Matters Before You Choose a X Chock

Key buying criteria so you get the right fit the first time.

  1. 01

    Tire gap range

    The gap is the distance between the two tires on one side of a tandem axle, measured on level ground. An X-chock expands only within a stated range, such as 3.5 to 12 inches or 3 to 10 inches. A gap outside the range means the chock either will not fit or cannot push the tires apart. Measure the gap on both sides and compare it with the listing. If your gap changes with tire pressure, measure with the tires at their normal pressure.

  2. 02

    How it stops the rocking

    The chock pushes the two tires apart so each one is pressed against the pavement and the trailer cannot roll back and forth. That removes most of the rocking and also resists the tires sliding on a slight slope. An X-chock is not a substitute for parking chocks on a hill. Use it to reduce movement and still set the parking brakes. Add parking chocks on a hill, because an X-chock is not rated as a parking device.

  3. 03

    Cast iron or steel build

    Cast iron is heavy and rigid and handles torque at the joints, while steel is lighter and may flex more under hard tightening. A coating such as electrophoretic treatment or powder coat protects either from rust. The BEBOBLY and PAULINN are cast iron, and the CircleRoad and EPOARTIST are steel. Read the material line and inspect the coating each season. Cast iron should be oiled at the threads to keep it turning in damp storage.

  4. 04

    Tools and tightening

    Most X-chocks are tightened with a ratchet wrench or a drill, and the socket must match the bolt. A kit that includes the wrench or socket adapter saves a search through the toolbox. The Proud Panda includes a crank handle and a socket adapter, and the PAULINN an electric screw head. Check what is in the box. Check that the socket size on the tool matches the bolt head before you leave home.

  5. 05

    Grip surface

    Raised ribs or patterns on the pad press into the tire and resist slipping when the chock is tight. A smooth pad can slip on a wet tire. The BEBOBLY lists raised ribs, and the PAULINN a pattern on both sides. Look for a named grip design. If the pad skids on wet tire rubber, wipe the tire dry first.

  6. 06

    Limits of an X-chock

    An X-chock reduces fore-and-aft rocking but does not lift the trailer or replace leveling jacks. Sideways sway and corner movement still need stabilizer jacks. Using both together gives a much steadier rig. Treat the chock as one part of a stabilization setup. Pair the chocks with stabilizer jacks for the steadiest result.

Our standards

Why You Can Trust RV Gear Lab

At RV Gear Lab, we compare products based on rig fit and power or hookup compatibility, verified specifications, usability, setup requirements, weight, durability, and real-world trade-offs. We do not rank products purely on marketing claims or commission rates.

We have not personally tested every product listed. Where hands-on testing is not available, recommendations are based on verified manufacturer specifications, product documentation, use-case fit, and comparative research.

How we review RV gear →

Detailed reviews

The 6 best x chocks, explained

01
Camper Wheel Chock Stabilizer 2 Sets
  • Fits 3.5 to 12 inch tire gaps
  • 2 chocks, crank handle, socket adapter
  • Electrophoretic rust treatment
Check price on Amazon for Camper Wheel Chock Stabilizer 2 Sets (opens in a new tab)
Best for: Most tandem axle trailers with a typical gap

Our take

Each box contains two chock stabilizers, a crank handle and a socket adapter, so a drill or a handle can tighten them.

Why it made the shortlist

The Proud Panda is a set of two scissor-type X-chocks that fit the tightest tire gap down to 3.5 inches and extend out to 12 inches. They apply an opposing force to the two tires to prevent wheel shift, and they suit travel trailers, campers, Class A motorhomes, fifth wheels and toy haulers. The opposing force on both tires is the principle every unit here uses.

Compared with the RVPNR, the Proud Panda range is wider at both ends, so it covers tighter and wider tandem gaps. An electrophoretic treatment on the surface is applied to prevent rust.

Choose it when you want the widest stated range and a rust-resistant coating. Because the range is wide, one set can follow you if you swap to a different tandem trailer later.

What works

  • Spans 3.5 to 12 inch gaps
  • Opposing force on both tires stops wheel shift
  • Rust-preventing electrophoretic coating
  • Crank handle and socket adapter included

Watch out for

  • No storage bag mentioned
  • Gap must be measured before ordering
  • Does not replace leveling jacks
02
BEBOBLY Camper RV Wheel Chock Stabilizer 2 Sets
  • Cast iron X-chock, 3.5 to 12 inches
  • Raised grip ribs on both sides
  • Ratchet wrench and storage bag
Check price on Amazon for BEBOBLY Camper RV Wheel Chock Stabilizer 2 Sets (opens in a new tab)
Best for: Owners who want a heavy, grippy chock with a bag

Our take

The cast iron build gives a heavy, stable unit.

Why it made the shortlist

The BEBOBLY is a set of two X-shaped chocks made of cast iron with reinforced connections that withstand greater torque. They retract down to 3.5 inches and extend up to 12 inches and suit camping trailers, RVs, fifth wheels and tandem wheel trucks.

Compared with the Proud Panda, it adds raised ribs on both sides to increase grip on the tire, and the package includes a ratchet wrench, a socket adapter and a storage bag. Applying opposite force to the tandem tires prevents them from moving.

Choose it when you want a robust build, extra grip ribs and a bag to store the chocks. The extra weight of cast iron also helps the chock stay put while you tighten it.

What works

  • Cast iron resists torque at the joints
  • Raised ribs add grip on the tire
  • Ratchet wrench, socket and storage bag included
  • Spans 3.5 to 12 inch gaps

Watch out for

  • Cast iron is heavy to carry
  • Raw iron needs rust care if the coating chips
  • No gloves in the box
03
Best for: Drill tightening on small and large trailers

Our take

It works on small campers and large RV trailers alike, and the storage bag makes transport simple.

Why it made the shortlist

The PAULINN is a set of two X-chocks made from cast iron with reinforced connections, matched to wheel clearances from 3.5 to 12 inches. The X-shaped configuration spreads the load evenly to stop unwanted movement of the trailer.

Compared with the BEBOBLY, it has the same stated range and the same cast iron build, and it includes a ratchet wrench and an electric screw head. A pattern on both sides significantly increases friction with the tire.

Choose it when you want to use a drill with the electric screw head to set the chocks quickly. A drill makes the job quick when the trailer is already hitched and you are in a hurry.

What works

  • Cast iron X design spreads the load evenly
  • Electric screw head allows drill tightening
  • Friction pattern on both sides grips the tire
  • Storage bag included

Watch out for

  • Heavy, like other cast iron units
  • Needs a gap measurement before ordering
  • Listing gives few dimensions beyond range
04

Best Steel Build · 4 of 6

Camper Wheel Chock Stabilizer 2 Sets

Camper Wheel Chock Stabilizer 2 Sets
  • Steel X-chock, 3.5 to 12 inches
  • Ratchet wrench and hex socket
  • Rust-proof finish
Check price on Amazon for Camper Wheel Chock Stabilizer 2 Sets (opens in a new tab)
Best for: A lighter steel chock with tools in the box

Our take

It is a straightforward pair for a camper or motorhome that wants less movement.

Why it made the shortlist

The CircleRoad is a set of two heavy-duty X-shaped stabilizers made of high-quality steel with a rust-proof finish and reinforced connection points. The listing asks you to measure the distance between the two tires on your RV and states a fit for gaps between 3.5 and 12 inches.

Compared with the cast iron units, it uses steel and includes a complimentary multi-functional ratchet wrench and hex socket for fast installation. The side-grain design improves grip on the tire.

Choose it when you want a steel chock with its tools included. A steel pair is easy to toss in a bin and pull out whenever the campsite is level.

What works

  • Steel build with rust-proof finish
  • Reinforced connection points
  • Ratchet wrench and hex socket included
  • Side-grain pattern for tire grip

Watch out for

  • No storage bag is mentioned
  • Gap must be measured first
  • Steel can corrode where coating chips
05
EPOARTIST Original Camper Wheel Chock Stabilizer
  • Heavy-gauge steel, anti-rust paint
  • No-drill setup between tires
  • 1 year warranty
Check price on Amazon for EPOARTIST Original Camper Wheel Chock Stabilizer (opens in a new tab)
Best for: Warranty-backed rocking reduction

Our take

It is a practical choice for owners who want a clear warranty and a no-drill setup.

Why it made the shortlist

The EPOARTIST Original is an RV wheel stabilizer pair built from heavy-duty gauge steel with an anti-rust paint. It is designed to stop a travel trailer rocking when people walk around inside, and it sets up with no drilling, just placing it between the tires and expanding it into place.

Compared with the Proud Panda, its listing claims to eliminate 90 to 100 percent of the rocking and movement of a parked RV. A 1 year warranty comes standard, and the seller notes a 30 day free return window.

Choose it when your trailer rocks on its axles and you want a warranty-backed pair. The warranty window makes it low risk to try on a rig that has a stubborn rock.

What works

  • Heavy-gauge steel with an anti-rust finish
  • Claims to remove 90 to 100 percent of rocking
  • 1 year warranty included
  • No drilling required

Watch out for

  • Confirm the stated gap range before ordering
  • Performance claims are the seller's figures
  • Tires must be on level ground to expand evenly
06

Best Budget Chock · 6 of 6

RVPNR Camper Wheel Chock Stabilizer

RVPNR Camper Wheel Chock Stabilizer
  • Iron scissor chock, 3 to 10 inches
  • Black, grey or red powder coat
  • Wrench, hex socket, gloves, bag
Check price on Amazon for RVPNR Camper Wheel Chock Stabilizer (opens in a new tab)
Best for: Tandem gaps under 10 inches on a budget

Our take

Three color options let you match the chock to the rig.

Why it made the shortlist

The RVPNR is a scissor-style X-chock set made from heavy-duty iron with a powder-coated surface in black, grey or red. It prevents tire sliding on a slight slope by applying opposite force to the tandem tires. A powder coat in several colors lets you pick the one that shows least against dirty gravel.

The set includes two stabilizers, a ratchet wrench, a hex socket and gloves in a storage bag.

Choose it when your tandem gap is under 10 inches and you want a complete, lower-cost kit. Gloves in the box are a thoughtful extra when the chocks are muddy from the last stop.

What works

  • Powder coat in three color options
  • Wrench, hex socket and gloves included
  • Storage bag in the box

Watch out for

  • Narrower 3 to 10 inch range
  • Does not suit wide tandem gaps
  • Iron needs touch-up if chipped

Methodology

How We Built This Shortlist

Each pick was assessed across 5 criteria weighted for real-world use.

01

Tire gap range

We compared the stated minimum and maximum gap on each listing, because a chock outside your gap cannot expand to fit. Wide ranges earned credit since they fit more trailers, though a close match is what matters.

02

Material and rust protection

We looked at cast iron, steel and iron builds and the coating on each, since an X-chock lives outdoors. We weighed rust protection heavily, since a rusted scissor can seize.

03

Tightening tools

We compared the wrench, socket, handle and screw head in the box, because setup depends on the tool.

04

Grip features

We noted ribs, patterns and side-grain designs that grip the tire. Patterned pads were rated above smooth pads in the grip review.

05

Warranty and accessories

We noted bags, gloves and warranty terms. A bag and gloves count in a kit's favour for owners who store chocks away.

Decision guide

Match a X Chock to Your RV

By Tandem Tire Gap

Your situationRecommended pickWhy
Gap between 3.5 and 12 inches, standard trailerProud Panda X-ChockSpans 3.5 to 12 inches with a crank handle and socket adapter.
Gap 3.5 to 12 inches, wanting heavy cast ironBEBOBLY Cast Iron ChockCast iron with raised ribs and a storage bag.
Gap 3.5 to 12 inches, using a drillPAULINN Cast Iron ChockAn electric screw head allows drill tightening.
Gap 3.5 to 12 inches, wanting steel and toolsCircleRoad Steel ChockSteel build with a ratchet wrench and hex socket.
Gap under 10 inches on a budgetRVPNR Scissor ChockExpands 3 to 10 inches with gloves and a bag.

By Budget

BudgetRecommended pick
Entry of this shortlistRVPNR Scissor Chock or PAULINN Cast Iron Chock
Mid of this shortlistBEBOBLY Cast Iron Chock or EPOARTIST Original
Top of this shortlistProud Panda X-Chock or CircleRoad Steel Chock

Cast Iron vs Steel

Cast iron

Heavy and rigid, with joints that handle torque. BEBOBLY Cast Iron Chock and PAULINN Cast Iron Chock are cast iron.

Steel or iron plate

Lighter to carry and still strong. CircleRoad Steel Chock, EPOARTIST Original and RVPNR Scissor Chock are steel or iron plate.

For most owners, the Proud Panda X-Chock offers the widest gap range with a coating against rust.

By Extras and Warranty

PriorityRecommended pick
1 year warrantyEPOARTIST Original
Storage bag and ratchetBEBOBLY Cast Iron Chock
Gloves, wrench and bagRVPNR Scissor Chock
Crank handle and socket adapterProud Panda X-Chock

For Stopping Trailer Rocking Specifically

Look for

A gap range that covers your tandem tires, a tool that tightens firmly and a grippy pad

In this comparison

The EPOARTIST Original claims to remove 90 to 100 percent of rocking, and the Proud Panda X-Chock and BEBOBLY Cast Iron Chock cover 3.5 to 12 inch gaps.

When to Spend More

Spend more if

Spend more if you want a heavy-duty build, where the BEBOBLY Cast Iron Chock or PAULINN Cast Iron Chock adds cast iron and grip ribs.

Save if

Save if your gap is narrow, where the RVPNR Scissor Chock gives a full kit at the lowest price.

FAQ

Before You Bring One Home

How do I measure the gap for an X-chock?

Park on level ground and measure the clear distance between the two tandem tires on one side, at the ground. Compare it with the listing range, such as 3.5 to 12 inches on the Proud Panda X-Chock or 3 to 10 inches on the RVPNR Scissor Chock. Measure both sides. A second person reading the tape makes the gap measurement quicker.

Do X-chocks replace leveling jacks?

No. They reduce fore-and-aft rocking by pressing the tires, and stabilizer jacks control corner movement. Use both for the steadiest trailer. Set the parking brakes and wheel chocks on slopes. Stabilizer jacks at the corners and chocks at the wheels together give the steadiest trailer.

Is cast iron worth it over steel?

Cast iron, as on the BEBOBLY Cast Iron Chock, resists joint torque and feels solid. Steel units like the CircleRoad Steel Chock are lighter to carry. Choose by weight and how often you set them. Cast iron adds weight but also adds stiffness at the joints.

How do I install an X-chock?

Place it between the tandem tires, tighten it with a wrench or drill until it spreads the tires, and check it is snug. The Proud Panda X-Chock includes a crank handle and socket adapter. Do not overtighten against the tire. Tighten until snug and then add a quarter turn, no more.

How do I check the chocks after setup?

Walk around inside the trailer and feel for movement, then recheck tightness after a few hours. Tires can settle, so a chock may need a quarter turn. The EPOARTIST Original suggests setup is quick. Check again after the first night, when the rig has settled.

How do I store and care for X-chocks?

Dry them and store them in a bag, such as the one with the BEBOBLY Cast Iron Chock. Check the coating for chips and touch up bare metal. A light oil on the threads keeps them turning. A light coat of oil on the scissor screw before storage keeps it from seizing.

Bottom line

The short version

Browse more x chocks on Amazon →
Bowen Higgins, RV Editor at RV Gear Lab

About the author

Bowen Higgins

RV Editor at RV Gear Lab

Bowen covers RV power, water systems, towing and leveling, upkeep and interior comfort, with a focus on matching gear to the rig, the hookups and the way you actually travel.

More from Bowen →Editorial standards

Keep reading

Related guides