We research everything we recommend. When you buy through our links, we may earn a commission. Learn more

Buying guide · 10 min read · Updated October 2, 2026

5 Best RV Water Heater Bypass Kit in 2026: A Practical RV Guide

Five RV water heater bypass kits and valves compared by tank size, hose, valve material and thread, for winterizing without filling the heater with antifreeze.

Bowen HigginsBy Bowen HigginsRV Editor at RV Gear Lab5 products comparedSpec-sheet researched

At a glance

Our top picks

Every autumn, RV owners in cold climates face the same chore: pumping antifreeze through the water lines so nothing freezes and splits. Without a bypass, that antifreeze also fills the water heater tank, which holds roughly 6 to 10 gallons and swallows that much pink fluid for no benefit. A bypass kit routes water around the heater so antifreeze reaches only the plumbing that needs it. The cost of a bypass kit is small compared with the antifreeze it saves every year.

A kit is a pair of valves and a short hose or tube that connect the heater's inlet and outlet, and installing one once makes every winterization quicker afterward. The picks here differ in valve material, in hose length, in whether they come as a full kit or a lone valve and in the thread type. Getting the match right matters more than the brand, since an ill-fitting kit leaks at the water heater, which is a hard place to reach.

We evaluated each listing by what is in the box, stated tank size, hose type, valve material and thread. Where a listing describes itself as an aftermarket part, we note it, since you should compare part numbers before ordering. Because the kit lives in a cramped access panel, we also weighed how easy each one is to operate with cold hands in the fall.

RV Gear Lab field notes

The Rig Fit Check

Start with the job
Camco RV Water Heater By-Pass Kit leads this shortlist for 10 gallon heaters winterized yearly. Use that fit as a reference point, then compare the alternatives against your own space and workload.
Specs that separate the picks
The first details to compare are Fits 10 gallon heaters, 1/2 inch NPT, Fits 6 gallon heaters, 1/2 inch NPT, PEX tubing with crimp rings. Confirm the exact model and included components before ordering.
Trade-off to plan for
Sized for 10 gallon heaters

Before you buy

What Matters Before You Choose an RV Water Heater Bypass Kit

Key buying criteria so you get the right fit the first time.

  1. 01

    Why a bypass is needed

    Winterizing pumps antifreeze through the lines, and without a bypass it fills the 6 to 10 gallon heater tank too. That wastes several gallons of antifreeze each year. A bypass closes the heater off and sends fluid through the plumbing. Look for a kit with two valves or a three-way arrangement. The saving repeats every year, so the kit tends to pay for itself within a few seasons of antifreeze purchases.

  2. 02

    Tank size and hose length

    Heaters come in 6 and 10 gallon sizes, and the hose must reach between the inlet and outlet. The Camco 10-Gallon Kit has a 12 inch hose and the Camco 6-Gallon Kit an 8 inch one. A hose that is too short strains the fittings. Match hose length to your heater. Measure the gap between the heater inlet and outlet before ordering, and leave a little slack so the hose does not kink.

  3. 03

    Valve material

    Brass valves are durable, while PPSU is a plastic that resists heat and chemicals. Hot water and antifreeze attack lesser plastics over time. Check the material in the listing, and avoid kits that name none. Brass holds up to years of heat cycles and antifreeze, while PPSU is a high-performance plastic that resists heat and chemicals. The RecPro PEX Kit names PPSU, and the Camco kits name brass. A listing that names no valve material should be treated as an unknown.

  4. 04

    Thread type and orientation

    Water heater ports use 1/2 inch NPT tapered threads, and a barbed valve joins tubing instead. A mismatch leaks. Check thread type, and orient hot and cold ends correctly, since the RecPro PEX Kit color-codes them. Most water heater ports use 1/2 inch NPT tapered threads, which seal when wrapped with thread tape and tightened. Barbed ends, as on the RecPro 3-Way Valve, join tubing instead and need clamps or crimp rings. A mismatch in thread type is the most common cause of a leak at the heater.

  5. 05

    Part number matching

    Replacement kits state the part numbers they replace, as the Xianhaoparts Replacement does for Valterra P23505LFVP and Camco 35983. A match means the fittings line up with your existing install. Compare photos and part numbers before ordering. Replacement kits name the part numbers they stand in for, as the Xianhaoparts Replacement does for Valterra P23505LFVP and Camco 35983. That listing also calls itself an aftermarket part, which is a reason to compare photos and numbers before ordering. A match means the fittings line up with your existing install.

  6. 06

    Flow indicators and handles

    Handles that show open or bypass positions prevent mistakes. Sending antifreeze to the heater or leaving it bypassed all summer are both avoidable errors. The Camco 10-Gallon Kit has indicators on its handles. Check that handles are marked. A clearly marked handle also helps the next person who works on the rig, whether that is a technician or a spouse.

Our standards

Why You Can Trust RV Gear Lab

At RV Gear Lab, we compare products based on rig fit and power or hookup compatibility, verified specifications, usability, setup requirements, weight, durability, and real-world trade-offs. We do not rank products purely on marketing claims or commission rates.

We have not personally tested every product listed. Where hands-on testing is not available, recommendations are based on verified manufacturer specifications, product documentation, use-case fit, and comparative research.

How we review RV gear →

Detailed reviews

The 5 best rv water heater bypass kit, explained

01

Best Overall · 1 of 5

Camco RV Water Heater By-Pass Kit

Camco RV Water Heater By-Pass Kit
  • Fits 10 gallon heaters, 1/2 inch NPT
  • 12 inch nylon-reinforced hose
  • Brass 3-way valves with flow indicators
Check price on Amazon for Camco RV Water Heater By-Pass Kit (opens in a new tab)
Best for: 10 gallon heaters winterized yearly

Our take

It suits owners with a 10 gallon heater who winterize every year.

Why it made the shortlist

The Camco RV Water Heater By-Pass Kit is built for 10 gallon water heater tanks and fits 1/2 inch 14 NPT tapered threads. It includes a 12 inch nylon-reinforced, crimp-proof bypass hose, two 3-way brass bypass valves with shutoff and Teflon tape.

Compared with the Camco 6-Gallon Kit, it has a longer 12 inch hose for heaters that need more reach, with the same permanent-install idea. The valve handles have flow indicators that show open or bypass positions at a glance.

Mount it once and every later winterizing is faster, as the listing explains. Spring winterizing goes quicker once the valves are in place.

What works

  • Brass 3-way valves with shutoff
  • 12 inch crimp-proof hose reaches farther
  • Flow indicators show valve position
  • Teflon tape included in the kit

Watch out for

  • Sized for 10 gallon heaters
  • Permanent install takes some plumbing work
02

Best for Small Heaters · 2 of 5

Camco Camper/RV Water Heater By-Pass Kit

Camco Camper/RV Water Heater By-Pass Kit
  • Fits 6 gallon heaters, 1/2 inch NPT
  • 8 inch crimp-proof hose
  • Brass valves with flow indicators
Check price on Amazon for Camco Camper/RV Water Heater By-Pass Kit (opens in a new tab)
Best for: Small heaters in tight bays

Our take

Camco Camper/RV Water Heater By-Pass Kit makes the shortlist because shorter 8 inch hose suits tight bays.

Why it made the shortlist

The Camco Camper RV Water Heater By-Pass Kit is designed for 6 gallon heater tanks and fits 1/2 inch 14 NPT tapered threads. The listing says it saves 6 to 10 gallons of antifreeze each winterizing, and it includes an 8 inch crimp-proof hose, two 3-way brass valves with shutoff and Teflon tape.

Both share brass valves and flow indicators on the handles for quick visual confirmation.

What works

  • Shorter 8 inch hose suits tight bays
  • Brass 3-way valves with shutoff
  • Saves 6 to 10 gallons of antifreeze
  • Flow indicators on the handles

Watch out for

  • Hose is too short for some heaters
  • Sized for 6 gallon heaters
The catch
It is the shorter-hose sibling of the Camco 10-Gallon Kit, which suits the tighter spacing on a 6 gallon heater.
03

Best Heat-Resistant Valves · 3 of 5

RecPro RV Water Heater Bypass Kit

RecPro RV Water Heater Bypass Kit
  • PEX tubing with crimp rings
  • PPSU valves resist heat and chemicals
  • Blue cold end, red hot end
Check price on Amazon for RecPro RV Water Heater Bypass Kit (opens in a new tab)
Best for: PEX plumbing and heat-rated valves

Our take

It suits owners who prefer a PEX plumbing style and hot-water-rated valves.

Why it made the shortlist

The RecPro RV Water Heater Bypass Kit uses a length of PEX tubing with crimp rings and a fitting for either side. The listing says the valves are PPSU, which resist heat, aggressive water and chemicals better than normal valves.

Unlike the Camco kits with brass valves and a nylon hose, this one uses PEX and PPSU, and it is made in the USA. The blue end connects to the heater's cold inlet and the red end to the hot outlet, then is hand tightened plus a quarter turn.

The color-coded ends make it easy to orient. Hot-water-rated valves give extra confidence in a heater line.

What works

  • PPSU valves resist heat and chemicals
  • Color-coded cold and hot ends
  • Made in the USA
  • Hand tighten plus a quarter turn

Watch out for

  • Listing gives no tank size
  • PEX needs crimp tools or fittings
04
Best for: Replacing a known Valterra or Camco kit

Our take

It suits owners who know their part number and want a matching swap.

Why it made the shortlist

The Xianhaoparts RV Water Heater By-Pass Kit is listed as compatible with the Valterra P23505LFVP and the Camco 35983 Quick Turn. It includes a hose, tape, two 1/2 inch NPT male-port valves and two dual female fittings.

Where the Camco kits are branded originals, this one is a replacement for those part numbers, which suits owners whose existing kit has failed. It supports bypassing the heater during off-season storage or when using antifreeze.

Comparing photos and part numbers first confirms it is the right fit. Matching the part number saves guesswork on a repair day.

What works

  • Matches two common part numbers
  • Complete set of valves and fittings
  • Includes hose and tape
  • Supports winterizing and storage bypass

Watch out for

  • Aftermarket part, compare part numbers first
05
RecPro RV 1/2" Three-Way Water Heater Bypass Valve
  • 1/2 inch three-way bypass valve
  • 1/2 inch barbed connections
  • For 2-valve winterizing systems
Check price on Amazon for RecPro RV 1/2" Three-Way Water Heater Bypass Valve (opens in a new tab)
Best for: Swapping one worn bypass valve

Our take

It suits owners with a working two-valve bypass who need one valve replaced.

Why it made the shortlist

The RecPro RV 1/2 Inch Three-Way Water Heater Bypass Valve is a single valve with 1/2 inch barbed connections that shuts off flow and redirects water away from the heater. It is used when winterizing RVs with 2-valve systems.

It is the lowest-priced pick here and a replacement for a single worn valve rather than a whole kit.

It keeps antifreeze out of the heater tank and in the water lines. Fitting one valve at a time keeps the job small and quick.

What works

  • Replaces a single worn valve
  • Keeps antifreeze out of the heater
  • Shut-off handle redirects flow

Watch out for

  • Single valve, not a full kit
  • Barbed ends need clamps or crimps

Methodology

How We Built This Shortlist

Each pick was assessed across 5 criteria weighted for real-world use.

01

Kit or single valve

We separated complete kits from a lone valve, since a kit needs no other parts. A complete kit and a single valve were scored differently, since a kit needs nothing more.

02

Tank size match

We checked which listings state a 6 or 10 gallon tank and which leave size unstated. Listings that name a 6 or 10 gallon tank were noted for sizing.

03

Valve and hose material

We compared brass, PPSU, nylon-reinforced hose and PEX tubing. Brass, PPSU and nylon-reinforced hose were compared for durability.

04

Threads and fittings

We looked at 1/2 inch NPT threads and barbed ends, since they decide what the kit connects to. Thread type decides what each kit connects to, so it was checked on each listing.

05

Part-number matching

We noted which listings give part numbers to compare with your existing kit. Part numbers were noted wherever a listing gave them.

Decision guide

Match an RV Water Heater Bypass Kit to Your RV

By heater size

Your situationRecommended pickWhy
10 gallon heater, brass valvesCamco 10-Gallon KitA 12 inch hose and brass 3-way valves for 10 gallon tanks
6 gallon heater, tight bayCamco 6-Gallon KitAn 8 inch hose and brass valves for 6 gallon tanks
PEX plumbing in the rigRecPro PEX KitPEX tubing, crimp rings and PPSU valves
Replacing a Valterra or Camco kitXianhaoparts ReplacementA kit that matches Valterra P23505LFVP and Camco 35983
One worn valve to replaceRecPro 3-Way ValveA 1/2 inch three-way valve with barbed connections

By Budget

BudgetRecommended pick
Entry of this shortlistRecPro 3-Way Valve or RecPro PEX Kit
Mid of this shortlistCamco 6-Gallon Kit or Camco 10-Gallon Kit
Top of this shortlistXianhaoparts Replacement

Brass kit vs PEX kit

Brass kit

Brass valves with a reinforced hose are durable and simple. The Camco 10-Gallon Kit and Camco 6-Gallon Kit work this way.

PEX kit

PEX tubing with PPSU valves resists heat and chemicals. The RecPro PEX Kit works this way.

Choose the Camco 10-Gallon Kit for a standard heater, or the RecPro PEX Kit for PEX plumbing.

By what you need to buy

If you needRecommended pick
A complete kit with tapeCamco 10-Gallon Kit
A matching replacementXianhaoparts Replacement
Only one valveRecPro 3-Way Valve

For Annual Winterizing Specifically

Look for

A permanent kit with marked handles, matched thread and the right hose length

In this comparison

The Camco 10-Gallon Kit and Camco 6-Gallon Kit both have flow indicators and save 6 to 10 gallons of antifreeze per the listing.

When to Spend More

Spend more if

Spend more on the Camco 10-Gallon Kit for brass valves and a longer hose, or on the RecPro PEX Kit for heat-resistant PPSU valves.

Save if

Save with the RecPro 3-Way Valve, the lowest-priced pick here, or the Camco 6-Gallon Kit for a complete brass kit.

FAQ

Before You Bring One Home

Why do I need a water heater bypass?

It keeps antifreeze out of the heater tank, which holds 6 to 10 gallons. The Camco 10-Gallon Kit routes fluid around the heater. Without it, you waste antifreeze every winter.

Which kit fits my water heater?

Check your tank size and hose reach. The Camco 6-Gallon Kit uses an 8 inch hose, and the Camco 10-Gallon Kit a 12 inch one. For a replacement, compare part numbers, as on the Xianhaoparts Replacement.

Is a kit worth it over a single valve?

If you have no bypass, yes. A kit like the Camco 10-Gallon Kit includes valves, a hose and tape. The RecPro 3-Way Valve only suits a system that already has the rest.

How do I install a bypass kit?

Drain the heater, then connect the valves to the inlet and outlet with tape on tapered threads. On the RecPro PEX Kit, the blue end goes to the cold inlet and the red end to the hot outlet. Check for leaks.

How do I use the bypass in winter?

Set the valves to bypass before pumping antifreeze, then return them to normal in spring. Handles with flow indicators, as on the Camco 6-Gallon Kit, make the position easy to see. In spring, return both valves to the normal position and flush the lines before use.

Should I choose a 6 gallon or 10 gallon kit?

Choose by your water heater's tank size and the space around its ports. The Camco 6-Gallon Kit pairs an 8 inch hose with a 6 gallon heater, and the Camco 10-Gallon Kit pairs a 12 inch hose with a 10 gallon one. Both use 1/2 inch 14 NPT tapered threads. If your heater is not stated on the paperwork, check the data plate on the heater itself.

Bottom line

The short version

Browse more rv water heater bypass kit on Amazon →
Bowen Higgins, RV Editor at RV Gear Lab

About the author

Bowen Higgins

RV Editor at RV Gear Lab

Bowen covers RV power, water systems, towing and leveling, upkeep and interior comfort, with a focus on matching gear to the rig, the hookups and the way you actually travel.

More from Bowen →Editorial standards

Keep reading

Related guides