We research everything we recommend. When you buy through our links, we may earn a commission. Learn more

Buying guide · 10 min read · Updated October 2, 2026

6 Best 4 Point Sway Control Hitch in 2026: A Practical RV Guide

Four-point sway control hitches built into weight distribution: Equal-i-zer, CURT TruTrack and Nilight models compared by rating, shank and fit.

Bowen HigginsBy Bowen HigginsRV Editor at RV Gear Lab6 products comparedSpec-sheet researched

At a glance

Our top picks

A four-point hitch resists sway at several contact points built into the head and frame brackets, so there is no separate bolt-on sway bar to set up. It is a weight distribution hitch first, which means it also levels the tow vehicle, and that shapes every buying decision below.

The six picks are ordered by how clearly each listing states its ratings and what comes in the box. Because tongue weight rating decides whether a hitch rides smoothly or stiffly, each entry says plainly where the rating is stated and where you should confirm it.

RV Gear Lab field notes

The Rig Fit Check

Start with the job
Equal-i-zer 4-point Sway Control Hitch leads this shortlist for Mid-size travel trailers. Use that fit as a reference point, then compare the alternatives against your own space and workload.
Specs that separate the picks
The first details to compare are 10,000 lb trailer, 1,000 lb tongue, 14,000 lb trailer, 1,400 lb tongue, 16,000 lb trailer, 1,600 lb tongue. Confirm the exact model and included components before ordering.
Trade-off to plan for
Hitch shank is not included

Before you buy

What Matters Before You Choose a 4 Point Sway Control Hitch

Key buying criteria so you get the right fit the first time.

  1. 01

    Tongue weight rating

    Tongue weight is the downward force on the hitch ball, typically 10 to 15 percent of the loaded trailer weight. A hitch rated far above it rides stiff and transfers road shock into the truck, while one rated below it is unsafe. Weigh your loaded trailer tongue and choose a rating that sits just above it.

  2. 02

    Four-point versus spring and cam

    Equal-i-zer designs resist sway through four friction points, while CURT TruTrack uses a spring and cam system as well. Friction designs need no extra bar, but they do need the bracket in the right place. Read the listing for the design name and bracket placement.

  3. 03

    Shank included or not

    The shank sets drop or rise and receiver size, and some kits leave it out. Equal-i-zer 1400 and 1000 list the shank as not included, which adds cost and a measurement step. Check the title for does not include or includes shank wording.

  4. 04

    Surge brake and trailer type

    Boat and some utility trailers use surge brakes, and weight distribution brackets can interfere with them. The Equal-i-zer 1000 lists compatibility with surge brake trailers. Look for that wording if your trailer has surge brakes.

  5. 05

    Setup effort and adjustment

    Weight distribution hitches need adjusting for every trailer and load, using the chain link or bar tension. A fixed bracket design gives repeatable results, while chain designs vary. Check how the listing describes tensioning and read the maker's manual before towing.

  6. 06

    Sway control does not fix a bad load

    A hitch resists sway but cannot cure a trailer with too little tongue weight. Loading too far back lowers tongue weight below 10 percent and invites sway. Weigh the tongue and shift cargo forward before you blame the hitch.

Our standards

Why You Can Trust RV Gear Lab

At RV Gear Lab, we compare products based on rig fit and power or hookup compatibility, verified specifications, usability, setup requirements, weight, durability, and real-world trade-offs. We do not rank products purely on marketing claims or commission rates.

We have not personally tested every product listed. Where hands-on testing is not available, recommendations are based on verified manufacturer specifications, product documentation, use-case fit, and comparative research.

How we review RV gear →

Detailed reviews

The 6 best 4 point sway control hitch, explained

01

Best Overall 4-Point · 1 of 6

Equal-i-zer 4-point Sway Control Hitch

Equal-i-zer 4-point Sway Control Hitch
  • 10,000 lb trailer, 1,000 lb tongue
  • Integrated 4-point sway control
  • Shank sold separately
Check price on Amazon for Equal-i-zer 4-point Sway Control Hitch (opens in a new tab)
Best for: Mid-size travel trailers

Our take

Best for a travel trailer in the 7,000 to 10,000 lb range with a tongue weight near 900 lb.

Why it made the shortlist

The Equal-i-zer 90-00-1001 is rated for 10,000 lb trailer weight and 1,000 lb tongue weight, and its listing describes integrated 4-point sway control with weight distribution that transfers tongue weight to all axles.

It ranks first because the 1,000 lb tongue weight rating suits many mid-size travel trailers without riding stiff.

Buy the shank separately and measure your receiver height for the drop first.

What works

  • Works with surge brake trailers
  • Sway bracket sits 27 to 32 inches back
  • Shanks come in several sizes

Watch out for

  • Hitch shank is not included
  • Heavier than a basic friction bar setup
02

Best Heavier Trailers · 2 of 6

Equal-i-zer 4-point Sway Control Hitch

Equal-i-zer 4-point Sway Control Hitch
  • 14,000 lb trailer, 1,400 lb tongue
  • 4-point sway control
  • Shank not included
Check price on Amazon for Equal-i-zer 4-point Sway Control Hitch (opens in a new tab)
Best for: Heavy toy haulers

Our take

Best for a trailer with a tongue weight above 1,000 lb.

Why it made the shortlist

The Equal-i-zer 90-00-1401 is rated for 14,000 lb trailer weight and 1,400 lb tongue weight, with the same 4-point sway control design.

It costs about $135 more than the 1000 for the extra capacity.

If your trailer is lighter, the Equal-i-zer 1000 will feel smoother.

What works

  • Handles tongue weights up to 1,400 lb
  • Same 4-point design as the 1000
  • Built-in weight distribution
  • Rated for heavy bumper-pull trailers

Watch out for

  • Shank is a separate purchase
  • Rides stiff under a light tongue weight
The catch
The title says the weight distribution kit does not include a hitch shank.
03

Best Complete Kit · 3 of 6

Equal-i-zer 4-point Sway Control Hitch

Equal-i-zer 4-point Sway Control Hitch
  • 16,000 lb trailer, 1,600 lb tongue
  • Standard shank included
  • Sway control plus weight distribution
Check price on Amazon for Equal-i-zer 4-point Sway Control Hitch (opens in a new tab)
Best for: Heaviest bumper-pull trailers

Our take

Best for the heaviest bumper-pull trailers where the shank is included and the rating headroom matters.

Why it made the shortlist

The Equal-i-zer 90-00-1600 is rated for 16,000 lb trailer weight and 1,600 lb tongue weight, and the title says the kit includes a standard hitch shank. The listing says the maximum gross towing weight is 16,000 lb and describes sway control and weight distribution working together.

Compared with the Equal-i-zer 1400 above, it adds a higher rating and includes the shank, which saves a purchase. It is also the most expensive hitch in this list.

What works

  • Standard shank is in the kit
  • Integrated sway control
  • One purchase covers the whole hitch

Watch out for

  • Most expensive pick here
  • Shank drop is not spelled out
04
CURT 17500 TruTrack 4P Weight Distribution Hitch with Sway Control
  • Four points of sway control
  • Spring and cam system
  • Trunnion-style forged spring bars
Check price on Amazon for CURT 17500 TruTrack 4P Weight Distribution Hitch with Sway Control (opens in a new tab)
Best for: Spring and cam preference

Our take

Best for a travel trailer owner who prefers a spring and cam design to friction points.

Why it made the shortlist

The CURT 17500 TruTrack 4P is a weight distribution hitch whose listing describes four points of sway control, a welded head with cast pieces and forged trunnion-style spring bars. The title says 10K, and the listing says it uses a spring and cam system with hardened components instead of friction alone.

It costs about $55 more than the Equal-i-zer 1000 and uses adjustable brackets that give fixed support instead of chains. Compared with the CURT 17499 below it is listed as the 10K model.

What works

  • Spring and cam, not friction alone
  • Welded head with cast pieces
  • Adjustable brackets give fixed support

Watch out for

  • Shank details are not spelled out
05
Best for: Buyers comparing capacity, compatibility, included components and storage needs

Our take

Best for a buyer who has already confirmed the ratings with CURT and wants the lowest-priced spring and cam hitch here.

Why it made the shortlist

The CURT 17499 TruTrack 4P has the same listed design as the 17500: four points of sway control, a welded head with cast pieces and trunnion-style forged spring bars. Its title states no weight rating.

Do not buy it until you know the trailer and tongue weight limits.

What works

  • Spring and cam, not friction alone
  • Forged trunnion-style spring bars
  • Adjustable brackets give fixed support

Watch out for

  • Shank details are not spelled out
06
Best for: Lighter trailers on a budget

Our take

Best for a lighter travel trailer on a tight budget.

Why it made the shortlist

The Nilight 800 lb round bar hitch is listed with 4-point swivel control using fixed support brackets, a heavy-duty 2 inch solid steel shank and a 2-5/16 inch ball. The listing says it is rated for 8,000 to 10,000 lb gross trailer weight.

The shank and ball are included, which the Equal-i-zer picks do not offer.

What works

  • Shank and ball included in the kit
  • Fixed support brackets limit lateral motion
  • Rust-resistant coating listed

Methodology

How We Built This Shortlist

Each pick was assessed across 5 criteria weighted for real-world use.

01

Rating clarity

We compared stated trailer and tongue weight ratings and flagged listings that omit one.

02

Sway design

We separated friction-point designs from spring and cam designs.

03

What is in the box

We checked whether the shank, ball and brackets are included.

04

Trailer compatibility

We noted surge brake support and shank size options.

05

Price against rating

We compared price per pound of tongue weight capacity.

Decision guide

Match a 4 Point Sway Control Hitch to Your RV

By Trailer Tongue Weight

Your situationRecommended pickWhy
Around 900 lb tongue weightEqual-i-zer 10001,000 lb rating with headroom.
Around 1,300 lb tongue weightEqual-i-zer 14001,400 lb tongue rating.
Above 1,400 lb tongue weightEqual-i-zer 16001,600 lb tongue rating, shank included.
Light travel trailer, tight budgetNilight 4-PointShank and ball included in the kit.
Want a spring and cam designCURT 17500Spring and cam, 10K in the title.

By Budget

BudgetRecommended pick
$300 to $560Nilight 4-Point or Equal-i-zer 1000
$590 to $610CURT 17499 or CURT 17500
$680 to $750Equal-i-zer 1400 or Equal-i-zer 1600

Friction Points vs Spring and Cam

Friction points

Resists sway by friction at four contact points on the head and frame brackets. Equal-i-zer 1000, Equal-i-zer 1400, Equal-i-zer 1600 and Nilight 4-Point fit here.

Spring and cam

Uses cams and spring bars with fixed brackets instead of friction alone. CURT 17500 and CURT 17499 fit here.

Most buyers should default to the Equal-i-zer 1000 or a larger Equal-i-zer sized to their tongue weight, and choose a CURT if the cam design appeals.

By Install Preference

PreferenceRecommended pick
Shank already includedEqual-i-zer 1600
Fixed adjustable bracketsCURT 17500
Lowest cost kit with shank and ballNilight 4-Point
Surge brake trailerEqual-i-zer 1000

For a Mid-Size Travel Trailer Specifically

Look for

A tongue weight rating just above your loaded tongue weight, so the bars flex properly, as the Equal-i-zer 1000 rating does for a 900 lb tongue.

In this comparison

The Equal-i-zer 1000 rates 1,000 lb tongue weight and the Equal-i-zer 1400 rates 1,400 lb, so the 1000 is the closer fit for most mid-size trailers.

When to Spend More

Spend more if

Spend more on the Equal-i-zer 1600 if the trailer is heavy and you want the shank included, or the Equal-i-zer 1400 for a tongue weight above 1,000 lb.

Save if

Save with the Nilight 4-Point on a light trailer, or the CURT 17499 once you have confirmed its ratings with CURT.

FAQ

Before You Bring One Home

Is a 4-point hitch the same as a weight distribution hitch?

Yes, in these listings the sway control is built into a weight distribution hitch. The Equal-i-zer 1000 describes both functions, while a friction bar only resists sway.

What mistake do buyers make with ratings?

Buying the largest rating for safety. A 1,600 lb tongue weight hitch under a 900 lb tongue rides stiffer, so pick a rating just above your actual tongue weight.

Is the Equal-i-zer 1000 worth it over the Nilight 4-Point?

For trailers near 10,000 lb, yes. The Equal-i-zer states trailer and tongue ratings and surge brake compatibility, while the Nilight is cheaper but lists lower ratings.

How do I set up a 4-point hitch?

Level the trailer, attach the head and set the spring bar tension with the chain link or bracket, then position the sway bracket per the manual. Recheck the front fender height after loading.

How do I maintain it?

Lubricate the pivot points the maker names and check bolts and brackets for loosening every few trips. Store it clean and dry to prevent rust.

Bottom line

The short version

Browse more 4 point sway control hitch on Amazon →
Bowen Higgins, RV Editor at RV Gear Lab

About the author

Bowen Higgins

RV Editor at RV Gear Lab

Bowen covers RV power, water systems, towing and leveling, upkeep and interior comfort, with a focus on matching gear to the rig, the hookups and the way you actually travel.

More from Bowen →Editorial standards

Keep reading

Related guides