We research everything we recommend. When you buy through our links, we may earn a commission. Learn more

Buying guide · 10 min read · Updated October 2, 2026

6 Best Weight Distribution Hitch For 800 Lb Tongue Weight in 2026: A Practical RV Guide

Weight distribution hitches for an 800 lb tongue weight, led by Fastway's 800 lb e2 and Camco's 800 lb kits, with CURT's round bar and ProPride 3P below.

Bowen HigginsBy Bowen HigginsRV Editor at RV Gear Lab6 products comparedSpec-sheet researched

At a glance

Our top picks

An 800 lb tongue weight typically belongs to a loaded trailer of roughly 5,300 to 8,000 lb (10 to 15 percent). Fastway's e2 94-00-0800, Camco's TR3 800 lb and Camco's Elite Round Bar state an 800 lb rating, and the remaining three are rated 1,000 to 1,400 lb.

The ranking follows how closely stated ratings match 800 lb, with premium and wide-range listings below.

RV Gear Lab field notes

The Rig Fit Check

Start with the job
Fastway e2 2-Point Sway Control Round Bar Hitch leads this shortlist for Matched with sway. Use that fit as a reference point, then compare the alternatives against your own space and workload.
Specs that separate the picks
The first details to compare are 8,000 lb trailer rating, 600 lb title, 800 lb max TW, 800 lb round bar kit. Confirm the exact model and included components before ordering.
Trade-off to plan for
Title says 600 lb while the text says 800 lb

Before you buy

What Matters Before You Choose a Weight Distribution Hitch For 800 Lb Tongue Weight

Key buying criteria so you get the right fit the first time.

  1. 01

    800 lb tongue weight sizing

    An 800 lb tongue weight is typically 10 to 15 percent of a 5,300 to 8,000 lb loaded trailer. Fastway e2 94-00-0800 states 800 lb and 8,000 lb. Weigh the trailer.

  2. 02

    Exact match leaves no margin (800 lb tongue)

    A kit rated exactly 800 lb has no spare capacity for forward loading. A 1,000 lb kit leaves headroom but flexes less. Choose from the measured tongue weight.

  3. 03

    Sway control type at 800 lb tongue

    Fastway e2 94-00-0800 has integrated sway, Camco TR3 800 has clamp-adjusted sway and Camco Elite Round Bar 800 has a bolt-on bar. Each behaves differently when backing. Read the manual.

  4. 04

    Title versus text at 800 lb tongue

    Camco TR3 800 lb's title says 600 lb while its text says 800 lb. Use the lower figure until confirmed. Ask the seller.

  5. 05

    Receiver size

    ProPride's 3P comes in 2 inch and 3 inch versions. A 3 inch version fits only a 3 inch receiver. Measure before buying.

Our standards

Why You Can Trust RV Gear Lab

At RV Gear Lab, we compare products based on rig fit and power or hookup compatibility, verified specifications, usability, setup requirements, weight, durability, and real-world trade-offs. We do not rank products purely on marketing claims or commission rates.

We have not personally tested every product listed. Where hands-on testing is not available, recommendations are based on verified manufacturer specifications, product documentation, use-case fit, and comparative research.

How we review RV gear →

Detailed reviews

The 6 best weight distribution hitch for 800 lb tongue weight, explained

01
Fastway e2 2-Point Sway Control Round Bar Hitch
  • 8,000 lb trailer rating
  • 800 lb tongue weight
  • Round bar, 2-point sway
Check price on Amazon for Fastway e2 2-Point Sway Control Round Bar Hitch (opens in a new tab)
Best for: Matched with sway

Our take

Best for an 800 lb tongue weight with integrated sway.

Why it made the shortlist

The Fastway e2 94-00-0800 states 8,000 lb and 800 lb tongue weight with built-in two-point sway control on round bars. The Fastway e2 94-00-0800 is a round bar weight distribution hitch with built-in two-point sway control, rated 8,000 lb trailer weight and 800 lb tongue weight.

It states both ratings, unlike Camco Elite Round Bar 800, and adds integrated sway. It costs about the same as CURT 17063.

It is the round bar version of the 8,000 lb e2.

What works

  • Built-in sway control with no add-on bar
  • Round bar design rated 8,000 lb
  • Title states an 800 lb tongue weight
  • Includes standard hitch
02
Camco Eaz-Lift TR3 600lb Weight Distribution Hitch Kit
  • 600 lb title, 800 lb max TW
  • Adjustable sway control
  • Pre-installed 2-5/16 ball
Check price on Amazon for Camco Eaz-Lift TR3 600lb Weight Distribution Hitch Kit (opens in a new tab)
Best for: Switchable sway

Our take

Best for a trailer that backs up often.

Why it made the shortlist

Camco's TR3 800 lb lists 800 lb maximum tongue weight in its text, with adjustable sway control and a pre-installed ball. Camco's TR3 600 lb weight distribution hitch kit lists an 800 lb maximum tongue weight, a pre-installed 2-5/16 inch ball and adjustable sway control. The listing says the sway control can be turned off for reversing.

It adds a sway control that turns off for backing. Its title says 600 lb, which differs from the text.

What works

  • Sway control adjusts by clamp and switches off
  • Pre-installed 2-5/16 inch ball
  • Stated 800 lb max tongue weight
  • Built to avoid metal-on-metal wear

Watch out for

  • Title says 600 lb while the text says 800 lb
03
Camco Eaz-Lift Elite Round Bar Weight Distribution Hitch
  • 800 lb round bar kit
  • Includes sway control and ball
  • Pre-installed U-bolts and chains
Check price on Amazon for Camco Eaz-Lift Elite Round Bar Weight Distribution Hitch (opens in a new tab)
Best for: Ready-to-tow round bar

Our take

Best for a budget 800 lb round bar kit.

Why it made the shortlist

Camco's Elite Round Bar is an 800 lb kit with sway control, a ball and pre-installed U-bolts and chains. Camco's Eaz-Lift Elite Round Bar is an 800 lb weight distribution hitch kit that includes sway control and a hitch ball.

It costs less than Fastway e2 94-00-0800 and has a ready-to-tow setup. Its sway control is a separate friction bar.

It is a ready-to-tow choice for lighter trailers.

What works

  • Includes round bar WD hitch, sway control and ball
  • Ball and sway control ball pre-installed
  • Chain package pre-installed

Watch out for

  • Sway control is a separate friction bar
  • 800 lb class limits heavier trailers
04
CURT 17063 Round Bar Weight Distribution Hitch with Sway Control
  • 14,000 lb round bar with sway
  • Rated 10,000 to 14,000 lb GTW
  • Grease zerk fittings
Check price on Amazon for CURT 17063 Round Bar Weight Distribution Hitch with Sway Control (opens in a new tab)
Best for: Heavier CURT

Our take

It is a heavy-rated round bar kit that includes sway control.

Why it made the shortlist

CURT's 17063 is a round bar hitch rated for 10,000 to 14,000 lb GTW and 1,000 to 1,400 lb tongue weight with sway control. CURT's 17063 is a round bar weight distribution hitch with sway control, rated for 10,000 to 14,000 lb GTW and 1,000 to 1,400 lb tongue weight per the listing. Grease zerk fittings give access to the spring bar mounts.

Its range starts above 800 lb, so it is oversized. It costs about the same as Fastway e2 94-00-0800.

What works

  • Rated for a stated GTW range of 10,000 to 14,000 lb
  • Includes sway control
  • Grease zerk fittings
  • Forged steel round bars

Watch out for

  • Grease needed at the zerks
  • Sway control is a separate friction bar
The catch
Best only if a heavier trailer is planned.
05
Best for: ProPride 2 inch

Our take

Best for a committed ProPride buyer.

Why it made the shortlist

ProPride's 3P for a 2 inch receiver is listed for 1,000 to 1,400 lb of weight distribution. ProPride's 3P Jim Hensley hitch is listed for sway elimination and 1,000 to 1,400 lb of weight distribution, in this version for a 2 inch receiver and the 1000 model. The listing gives no other specs.

It costs far more than the others and its range starts above 800 lb. The listing is brief.

What works

  • Listed for 1,000 to 1,400 lb of weight distribution
  • Described as sway elimination
  • Premium build
  • Made for a 2 inch receiver

Watch out for

  • Listing gives little technical detail
06
Best for: ProPride 3 inch

Our take

ProPride 3P Jim Hensley Hitch for Sway Elimination and Weight Distribution makes the shortlist because listed for 1,000 to 1,400 lb of weight distribution.

Why it made the shortlist

ProPride's 3P for a 3 inch receiver is listed for the same 1,000 to 1,400 lb range. ProPride's 3P Jim Hensley hitch is listed for sway elimination and 1,000 to 1,400 lb of weight distribution, in this version for a 3 inch receiver and the 1000 model. The listing gives no other specs.

What works

  • Listed for 1,000 to 1,400 lb of weight distribution
  • Described as sway elimination
  • Premium build
  • Made for a 3 inch receiver

Watch out for

  • Listing gives little technical detail
The catch
It is the 3 inch version for large receivers and costs more than ProPride 3P 2 in 1000.

Methodology

How We Built This Shortlist

Each pick was assessed across 5 criteria weighted for real-world use.

01

Closest rating

Stated tongue weight ratings were ranked by how little they exceed 800 lb.

02

Exact match

Kits stating 800 lb were placed first.

03

Conflicting listings

Titles that differ from their text were flagged.

04

Sway features

Integrated, switchable and bolt-on sway control were noted.

05

Price

Premiums were weighed against stated features.

Decision guide

Match a Weight Distribution Hitch For 800 Lb Tongue Weight to Your RV

By Stated Tongue Weight

Your situationRecommended pickWhy
800 lb, integrated swayFastway e2 94-00-0800800 lb and 8,000 lb.
800 lb, switchable swayCamco TR3 800 lb800 lb in the body copy.
800 lb, budget round barCamco Elite Round Bar 800800 lb kit.
1,000 to 1,400 lbCURT 1706314,000 lb round bar.
1,000 to 1,400 lb, premiumProPride 3P 2 in 1000Premium design.

By Budget

BudgetRecommended pick
$320 to $370Camco Elite Round Bar 800 or CURT 17063
$360 to $570Fastway e2 94-00-0800 or Camco TR3 800 lb
$3980 to $4070ProPride 3P 2 in 1000 or ProPride 3P 3 in 1000

Integrated vs Add-On Sway

Integrated

Integrated sway stays engaged. Fastway e2 94-00-0800 is the example.

Add-on or switchable

Add-on sway is separate or can be turned off. Camco TR3 800 lb and Camco Elite Round Bar 800 use that approach.

Choose Fastway e2 94-00-0800 for integrated sway.

By Receiver Size

ReceiverRecommended pick
2 inchFastway e2 94-00-0800
2 inch, premiumProPride 3P 2 in 1000
3 inch, premiumProPride 3P 3 in 1000
2 inch, round barCURT 17063

For a Midsize Travel Trailer Specifically

Look for

Look for 800 lb stated tongue weight and a gross rating of 8,000 lb or more.

In this comparison

Fastway e2 94-00-0800 states both.

When to Spend More

Spend more if

Spend more for integrated sway, where Fastway e2 94-00-0800 beats Camco Elite Round Bar 800.

Save if

Save with Camco Elite Round Bar 800.

FAQ

Before You Bring One Home

What trailer has an 800 lb tongue weight?

Typically a loaded trailer of 5,300 to 8,000 lb, based on 10 to 15 percent. Measure it with a scale.

Is an 800 lb hitch enough?

Only if the measured tongue weight stays below it. A 1,000 lb kit leaves margin.

Is Fastway worth more than Camco?

It adds integrated sway and states both ratings. Camco Elite Round Bar 800 costs less.

How do I set up at 800 lb?

Level the trailer and tension the bars until the front axle recovers about half the height lost. Recheck loaded.

Which Camco rating is right for 800 lb tongue?

Camco TR3 800 lb's title says 600 lb and its text says 800 lb. Confirm with the seller.

Bottom line

The short version

Browse more weight distribution hitch for 800 lb tongue weight on Amazon →
Bowen Higgins, RV Editor at RV Gear Lab

About the author

Bowen Higgins

RV Editor at RV Gear Lab

Bowen covers RV power, water systems, towing and leveling, upkeep and interior comfort, with a focus on matching gear to the rig, the hookups and the way you actually travel.

More from Bowen →Editorial standards

Keep reading

Related guides