We research everything we recommend. When you buy through our links, we may earn a commission. Learn more

Buying guide · 11 min read · Updated October 2, 2026

6 Best 100 Amp RV Converters in 2026: A Practical RV Guide

Six 100 amp RV converter chargers compared on lithium profiles, voltage window, cooling and replacement fit, so you size the box to your battery bank.

Bowen HigginsBy Bowen HigginsRV Editor at RV Gear Lab6 products comparedSpec-sheet researched

At a glance

Our top picks

A 100 amp converter is the top of the usual deck-mount range, and the label alone tells you very little. The same "100A" can mean a steady rating or a short peak, it can hold full output only when campground voltage is healthy, and it may or may not charge lithium correctly. On a 12 volt system, 100 amps is roughly 1,200 watts of DC, which is a lot of heat for a small box to shed.

We compared six 100 amp units from $103.90 to $519.99 on what each listing actually publishes: charging profiles for lead-acid and lithium, voltage settings, the low-voltage point where output holds, cooling, protections and cable included. This list splits into one factory-style replacement for a WFCO 6800 series bay and five lower-cost aftermarket boxes, and the picks below spell out which gaps you accept at each price.

RV Gear Lab field notes

The Rig Fit Check

Start with the job
WFCO WF-68100A-AD WF-6800 Series Deck-Mount Converter Charger, 100 Amp leads this shortlist for replacing a factory 6800 series converter. Use that fit as a reference point, then compare the alternatives against your own space and workload.
Specs that separate the picks
The first details to compare are 100A, auto lead-acid or LiFePO4, 100A regulated 12V output, 100A, 4-stage charging. Confirm the exact model and included components before ordering.
Trade-off to plan for
Costs about $300 more than the next pricier unit

Before you buy

What Matters Before You Choose a 100 Amp RV Converter

Key buying criteria so you get the right fit the first time.

  1. 01

    Continuous output versus the label

    A converter rated 100 amps should deliver that current steadily, not as a short peak, because 100A at about 13.6 volts is over 1,300 watts of heat-producing work. If a box can only hold that briefly, it will derate or shut down when your fridge, pump and a charging bank all run together. Check the listing for words like "continuous" or "steady output" and, if absent, ask the seller or read the label photo for the rated amps.

  2. 02

    Low-input-voltage behavior

    Campground power often sags, and a converter that loses output when AC input drops charges slower exactly when you need it. Only some listings state where full output is held, such as the WFCO claim of full output down to 100 volts. Look for a stated minimum input voltage rather than a generic claim of wide range, and treat silence on the topic as unknown.

  3. 03

    Lithium charge profile

    A lithium bank wants a fixed absorb voltage, usually near 14.4 to 14.6 volts, and does not need the equalization or desulfation stage that lead-acid uses. A converter without a true lithium mode may overcharge, undercharge or never finish the cycle. Look for a named LiFePO4 setting, a numbered voltage you can set or fixed steps, then match them to the battery maker's charge spec.

  4. 04

    Bank size and wire gauge

    A 100 amp converter can push far more current than a small bank wants, and the DC wire and fuse must be sized for the full 100 amps. A listing that pairs a 100A box with a 75Ah to 80Ah bank is a reminder to check the battery's maximum charge current first. Read the battery's rated charge current and size the cable and fuse to the converter's output, not to the battery alone.

  5. 05

    Cooling and noise

    Heat is the main thing that shortens a converter's life, and a fan solves it at the cost of noise inside a small coach. Some listings describe a temperature-triggered fan and a metal housing, while others only say thermal protection exists. Check whether the listing names a fan, and plan ventilation clearance around the box as the manual specifies.

  6. 06

    Fit and replacement compatibility

    Factory bays are shaped for specific series, and a converter that fits the cutout and connectors saves hours of rewiring. The WFCO WF-6800 series is a common standard in RV builds, so a drop-in replacement from the same series is the easiest swap. Compare your existing unit's model label and mounting footprint to the listing's dimensions or fit statement before buying.

Our standards

Why You Can Trust RV Gear Lab

At RV Gear Lab, we compare products based on rig fit and power or hookup compatibility, verified specifications, usability, setup requirements, weight, durability, and real-world trade-offs. We do not rank products purely on marketing claims or commission rates.

We have not personally tested every product listed. Where hands-on testing is not available, recommendations are based on verified manufacturer specifications, product documentation, use-case fit, and comparative research.

How we review RV gear →

Detailed reviews

The 6 best 100 amp rv converters, explained

01
Best for: Replacing a factory 6800 series converter

Our take

Choose WFCO WF-68100A-AD WF-6800 Series Deck-Mount Converter Charger, 100 Amp for automatic battery detection means no profile switch to set.

Why it made the shortlist

The WFCO WF-68100A-AD is a 100 amp deck-mount converter in the WF-6800 series that RV builders already install, so it fits the cutout and wiring of an existing 6800 series bay. The listing states that it automatically detects lead-acid or LiFePO4 batteries, holds full output down to 100 volts of AC input, and uses power factor corrected charging that it says is up to 30 percent more efficient. It is listed as UL/CSA and FCC compliant.

The cost is $519.99, which is about $300 more than the PowerMax PM3 and roughly five times the VEVOR. Against those, you are paying for the standards listing and the drop-in fit, not for extra amps, since every unit here shares the same 100A label.

What works

  • Automatic battery detection means no profile switch to set
  • Holds full output down to 100 volts input
  • Fits where a WF-6800 series unit already sits
  • UL/CSA listing and FCC compliance are stated

Watch out for

  • Costs about $300 more than the next pricier unit
  • Feature text gives no dimensions or warranty length
02
PowerMax PM4-100A 100A Deck Mount RV Converter Charger Lithium
  • 100A regulated 12V output
  • Adjustable lithium charging
  • Thermal and polarity protection
Check price on Amazon for PowerMax PM4-100A 100A Deck Mount RV Converter Charger Lithium (opens in a new tab)
Best for: Buyers comparing capacity, compatibility, included components and storage needs

Our take

Choose it if you have a lithium bank, you are comfortable reading the battery maker's charge voltage and entering it, and you want a name-brand box under $200.

Why it made the shortlist

The PowerMax PM4-100A lists up to 100 amps of regulated 12V output, multi-stage charging for lead-acid banks, and adjustable output so a lithium bank can be charged to its required settings. It is a standalone deck-mount box with current limiting, reverse-polarity and thermal protection, priced at $189.

It ranks second because it combines an adjustable lithium profile with a lower price than the PM3 unit of the same brand, which sells for $30 more with a nearly identical feature list. Compared with the WFCO, it gives up the detected-battery convenience and the published low-voltage behavior, so you set the profile yourself.

What works

  • Adjustable output suits a properly configured lithium bank
  • Current limiting and thermal protection are listed
  • Standalone deck-mount format installs near the bank

Watch out for

  • Listing gives no numbered voltage range to verify
  • No low-voltage output figure is published
03
Best for: Lead-acid or AGM banks on a mid budget

Our take

Pick it if you run a conventional lead-acid or AGM bank and want a straightforward 4-stage charger at a mid price.

Why it made the shortlist

The RecPro 100 Amp converts 120VAC shore power into usable 12VDC, charges the battery while powering low voltage lights and appliances, and uses 4-stage charging. The listing says it works with both lead and lithium batteries and notes that the brand makes this line in 35, 45, 55, 60, 75 and 100 amp sizes. It sells for $189.95.

Compared with the generic 100A ranked last, it offers a clearer description of the charging stages.

What works

  • Four-stage charging is spelled out in the listing
  • Same family offers smaller 35 to 75 amp sizes
  • Powers 12V lights while it charges the battery

Watch out for

  • Lithium support is claimed with no profile details
  • No cooling or low-voltage figures are published
The catch
Its advantage over the cheaper units is a named, established RV-focused brand and a line of smaller sizes, so you could buy a 55 or 75 amp version of the same family if the bank is small.
04
PowerMax PM3-100-SME 100A RV Converter Charger Adjustable Lithium
  • 100A regulated 12V output
  • Adjustable lithium output
  • Deck-mount standalone box
Check price on Amazon for PowerMax PM3-100-SME 100A RV Converter Charger Adjustable Lithium (opens in a new tab)
Best for: Matching existing PowerMax gear

Our take

PowerMax PM3-100-SME 100A RV Converter Charger Adjustable Lithium is the better fit when matching existing PowerMax gear.

Why it made the shortlist

The PowerMax PM3-100-SME carries the same feature list as the PM4: up to 100 amps of regulated 12V output, multi-stage charging for lead-acid, adjustable output for lithium, deck-mount format and built-in current limiting, reverse-polarity and thermal protection. It is priced at $219.

It ranks fourth because it costs $30 more than the PM4 and the listing text shows no difference in features or stated capability. It does stay ahead of the VEVOR and generic units by being a recognizable brand with a lithium adjustability claim.

What works

  • Adjustable output supports configured lithium charging
  • Current limiting and reverse-polarity protection are listed
  • Deck-mount box installs near the battery bank
  • Same brand and features as the cheaper PM4

Watch out for

  • Costs $30 more with no stated added features
  • Listing gives no voltage steps or low-voltage claims
05
Best for: Tight budgets and hand-set charge voltage

Our take

Pick it for a low-cost secondary or workshop supply and a small to mid bank where you will set the voltage mode by hand.

Why it made the shortlist

The VEVOR 100 Amp is the cheapest unit here at $103.90 and publishes the most checkable controls: a 13V to 16.5V operating range, dedicated lead-acid and LiFePO4 modes, and fixed voltage options of 13.0V, 14.6V and 16.5V. It lists an intelligent cooling fan that starts above its rated temperature, a metal housing for heat dissipation, six protections and a 100 percent copper cable.

It sits fifth because the listing itself says it is suitable for large-capacity batteries rated 75Ah to 80Ah, which is a small bank for a 100 amp box and a mismatch worth noticing. Compared with the $163.99 generic unit, it explains its charge steps more clearly and states a cooling method.

What works

  • Published voltage steps let you match a battery spec
  • Cheapest unit at $103.90 with six protections
  • Temperature-triggered fan plus a metal heat-dissipating housing
  • Dedicated LiFePO4 and lead-acid charging modes

Watch out for

  • Listing pairs it with only 75Ah to 80Ah banks
  • No UL or similar safety listing is mentioned
The catch
Compared with the PowerMax boxes, it costs $85 to $115 less but lacks a published safety listing.
06
Best for: Fixed-mode charging when other units are out

Our take

100 Amp RV Converter 120V AC to 12V DC, Lead & Lithium Compatible, Built-in 4 Stage Smart Charging makes the shortlist because three preset voltages cover lead and lithium use.

Why it made the shortlist

This unbranded 100 amp converter lists a steady 100 amp output with three preset voltage modes of 13V, 14.6V and 16.5V, and four charging stages named Boost, Normal, Storage and Desulfation. The listing describes steel, plastic, aluminum alloy and copper construction and says the unit is meant for RVs, marine, automotive and car audio use. It is priced at $163.99.

It shares the same fixed modes as the VEVOR, so voltage choice is the same.

What works

  • Three preset voltages cover lead and lithium use
  • Four charge stages are named in the listing
  • Aluminum alloy parts help spread heat

Watch out for

  • No brand name is shown to identify warranty support
  • Costs $60 more than the VEVOR with the same presets
The catch
The caveat is the lack of a named brand, so confirm who handles returns and what the warranty covers before you hardwire it into a coach.

Methodology

How We Built This Shortlist

Each pick was assessed across 5 criteria weighted for real-world use.

01

Charging profile control

We checked whether each listing names a lithium or LiFePO4 mode, an adjustable voltage, or only a generic compatibility claim, since a wrong charge voltage shortens battery life.

02

Output at low voltage

We looked for any statement of how output behaves when campground AC sags, because a 100A label means little if the box falls short below 105 volts.

03

Heat and cooling design

Around 1,200 watts of DC output needs real heat removal, so we noted fans, metal housings and thermal protection against listings that say nothing.

04

Safety listing and protections

We compared stated certifications such as UL/CSA against lists of electronic protections, and weighted a safety listing more than a feature count.

05

Replacement fit and price

We considered whether a unit drops into an existing bay or needs rewiring, and weighed that against price across the $103.90 to $519.99 spread.

Decision guide

Match a 100 Amp RV Converter to Your RV

By Battery Bank and Charge Profile

Match the converter's charge control to the chemistry and size of the bank it will feed.

Your situationRecommended pickWhy
Lithium bank, want it set automaticallyWFCO 68100ADetects lead-acid or LiFePO4 on its own
Lithium bank, happy to enter a voltage by handPowerMax PM4Adjustable output at a $189 price
AGM or flooded lead-acid bankRecPro 100APlain 4-stage charging from a named brand
Small 75Ah to 80Ah bank, tight budgetVEVOR 100ALists 13V to 16.5V modes, matched to small banks
Need exact fixed voltages for a custom setupUnbranded 100APresets of 13V, 14.6V and 16.5V

By Budget

BudgetRecommended pick
Under $120VEVOR 100A
$160 to $200Unbranded 100A, PowerMax PM4 or RecPro 100A
$200 to $250PowerMax PM3
Above $500WFCO 68100A

Fixed Voltage Presets vs Automatic Detection

Fixed presets or manual adjustment

The VEVOR 100A and Unbranded 100A offer 13V, 14.6V and 16.5V choices, and the PowerMax PM4 and PM3 offer adjustable output. You must pick the right setting yourself, and a wrong choice can undercharge or stress a bank.

Automatic detection

The WFCO 68100A detects lead-acid or LiFePO4 and adjusts, which removes a setup step. You pay $300 or more over the other units for it, and the RecPro 100A sits in between with a lithium claim but no detail.

Most buyers with a single, known battery chemistry can save money with a manual unit, while anyone swapping banks later should lean toward automatic detection.

By Installation Situation

Your setupRecommended pickWhy
Replacing a WF-6800 series factory unitWFCO 68100ASame series, so the bay and wiring match
New standalone install near the battery bankPowerMax PM4Deck-mount standalone format is described
Cabin where fan noise would bother youPowerMax PM3Its listing mentions no fan, but check the manual first
Workshop or secondary 12V supplyVEVOR 100ACheapest unit with a copper cable included

For Lithium-Equipped Rigs Specifically

Look for

A stated LiFePO4 mode or an adjustable voltage, a way to avoid the lead-acid equalization stage, and a safety listing on the box, as the WFCO 68100A lists.

In this comparison

The WFCO 68100A detects LiFePO4 automatically, the PowerMax PM4 and PM3 offer adjustable output, and the VEVOR 100A has a dedicated LiFePO4 mode. The RecPro 100A only claims compatibility with no detail.

When to Spend More

Spend more if

You depend on the coach every night or camp at sites with sagging power; the WFCO 68100A is the only unit here that states full output down to 100 volts and a UL/CSA listing.

Save if

You have a small bank or an occasional-use trailer; the VEVOR 100A at $103.90 gives you stated voltage steps and six protections for a fifth of the WFCO price.

FAQ

Before You Bring One Home

Will a 100 amp converter fit where my old WFCO sits?

Only the WFCO WF-68100A-AD is stated to belong to the WF-6800 series, so it is the natural drop-in. The other boxes here are aftermarket, deck-mount designs that may need new mounting holes and connector changes. Check the model on your existing unit and measure the opening.

Is 100 amps too much for my battery bank?

It can be. The VEVOR listing pairs its 100A box with banks rated 75Ah to 80Ah, and many batteries limit charging current to a fraction of capacity. Look up your battery's maximum charge current, and if it is lower than the converter's output, pick a smaller converter or use a current limit.

Is the WFCO worth five times the VEVOR price?

It is worth it if you need the UL/CSA listing, automatic lead-acid and LiFePO4 detection, full output down to 100 volts and a factory-style fit. If you have a known battery, a stable shore supply and can set a voltage by hand, the cheaper units cover the basic job.

How do I set a converter for lithium charging?

Read the battery maker's absorb voltage, then select the matching preset or enter it on an adjustable unit. On the VEVOR and Unbranded 100A, the 14.6V preset is the closest listed to a typical LiFePO4 target, but verify it against your battery's spec. Never leave a 16.5V mode connected to a bank.

Can I run these without a battery connected?

Some listings describe the box as both a charger and a regulated 12V supply, but a converter with no battery can show unstable voltage under changing loads. Keep a battery in the circuit if the manual does not specifically allow battery-free operation.

How often should I check the converter?

Once or twice a season, look for dust in vents, a working fan, tight DC connections and discoloration on terminals. A loose high-current lug heats up quickly at 100 amps. Re-torque to the manual's value if one is given.

Bottom line

The short version

Browse more 100 amp rv converters on Amazon →
Bowen Higgins, RV Editor at RV Gear Lab

About the author

Bowen Higgins

RV Editor at RV Gear Lab

Bowen covers RV power, water systems, towing and leveling, upkeep and interior comfort, with a focus on matching gear to the rig, the hookups and the way you actually travel.

More from Bowen →Editorial standards

Keep reading

Related guides